where can i buy a intake manifold

ScottRogers

I'm needing a intake manifold so i can hook the rubber hose to my air cleaner. I have one off of a stock clubcar but it's too small.Is there a place that sells these or will I have to fabricate one? Attached is a pic of a random one to help explain what I need for those who arnt sure. not sure what my exact carb is but its a 16hp duomax. thanks for any help.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ScottRogers

I did find this one this morning. I will do some checking this afternoon when i get in from work. I might be able to use this one, not sure yet.

http://www.nrracing.com/product-p/qmnrr-9.htm

AaronW

You can find one here with us. They are made from 6061 billet aluminum and are ready to plug and play.

http://www.vegascarts.com/product-p/inman.htm

sho305

You need an intake or the fitting on the airbox (inlet) side of the carb? You can get them for gx390 for K&N style filters at kart places that should fit stock clone carbs. Vegas has the intake for the engine (that mounts on the head) so you can fit other carbs if that is what you mean.

One guy on here made a cool airbox fitting out of the 90 connector used on plastic conduit, the square part. He cut the side to fit then used the conduit part to pipe to the airbox. This is the fitting you would use on your house to direct the conduit into the ground for example.

ScottRogers

I ordered it from vegas carts this afternoon, :)