lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
Thread Tools Display Modes
Unread 04-02-2016, 12:10 PM   #1
Not Yet Wild
 
Join Date: Apr 2016
Posts: 6
Default Had to re-register.. And need help

My prev screen name was Brian Boyer, for some reason i couldn't locate the old account details and when i tried to recover my password i just kept getting error messages.

So anyway, the rule of if it can it will happen struck me yesterday. I think i boogered my connecting rod to crank surfaces up, motor will spin but its tough,.. Pulled plug to eliminate any compression, no difference..

So i was wanting to do this later than sooner. ARC rod (the zero deck height jobber not the factory length one),.. I'm going to order that. The crank~ i'm only assuming if the rod was damaged my crank is probably unhappy too. I was thinking i would order the VG stroker crank and turn my 420 (Lifan) into a 440.

Has anyone has the rod bearing surface get boogered like im describing?, it was in the shop, just setting off throttle idle speed,.. Kinda shocked that it happened but if it can it will. If anyone else has a similar experience is your motor ok? (After replacing the crank& rod)
Brian B. is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-02-2016, 05:29 PM   #2
Gone Wild
 
Streetbu's Avatar
Club Car
 
Join Date: Jun 2012
Location: Central NY
Posts: 1,018
Default Re: Had to re-register.. And need help

Yes. I seized the rod to the crank. You can usually clean the crank up. Use muriatic acid. It eats aluminum but not iron. Leave it in a bucket over night. Rinse very well the next day. May have to use some Emory cloth to finish polishing it.
Streetbu is offline   Reply With Quote
Unread 04-02-2016, 05:34 PM   #3
Not Yet Wild
 
Join Date: Apr 2016
Posts: 6
Default Re: Had to re-register.. And need help

Quote:
Originally Posted by Streetbu View Post
Yes. I seized the rod to the crank. You can usually clean the crank up. Use muriatic acid. It eats aluminum but not iron. Leave it in a bucket over night. Rinse very well the next day. May have to use some Emory cloth to finish polishing it.
I will give it a try, thanks
Brian B. is offline   Reply With Quote
Unread 04-02-2016, 07:24 PM   #4
Dazed & Confused
 
crash test dummy's Avatar
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 14,885
Default Re: Had to re-register.. And need help

Quote:
Originally Posted by Brian B. View Post
My prev screen name was Brian Boyer, for some reason i couldn't locate the old account details and when i tried to recover my password i just kept getting error messages.
you can pm roady89 or thenewguy
crash test dummy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
How do I register cart as LSV in Georgia? On Road Golf Carts!
Power Wise charger kicks on but needle does not register Electric EZGO


All times are GMT -5. The time now is 01:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.