06-14-2016, 06:37 PM | #1 |
Not Yet Wild
Join Date: Apr 2016
Location: central Ga.
Posts: 10
|
problems with wiring
Just purchased a clone honda with electric start from monster scooter. It came with no instructions on how to hook it up. Called monster scooter and they were no help at all. Suggested trying the internet. lol. So that's why i'm here looking for help. The starter switch has four wires and the engine only has two ???????
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2016, 07:16 PM | #2 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
re: problems with wiring
What kind of switch is it? Is the the factory key switch in your cart? What kind of cart? Is the key switch 2 position- off-on or 3 position- off-on-start?
|
06-14-2016, 08:13 PM | #3 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: problems with wiring
With out seeing the wiring I would guess the 2 wires coming from the engine would be the kill wire and the trigger wire for the solenoid. The other 2 wires would be a 12 volt feed to the key and the last would be a ground for the kill wire to the coil.
|
06-15-2016, 04:37 AM | #4 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: problems with wiring
What Shepard is correct, on pair should ground the ignition coil in the off position the other pair should supply 12v to the solenoid when the key switch is on.
|
06-15-2016, 06:03 AM | #5 |
Not Yet Wild
Join Date: Apr 2016
Location: central Ga.
Posts: 10
|
Re: problems with wiring
Thanks for all the suggestions. My switch is aftermarket and has the off/on/start.
|
06-15-2016, 06:05 AM | #6 |
Not Yet Wild
Join Date: Apr 2016
Location: central Ga.
Posts: 10
|
Re: problems with wiring
Also amen on the Hathcock mention!!!!! Right on Shepard.
|
06-15-2016, 02:03 PM | #7 |
Not Yet Wild
Join Date: Apr 2016
Location: central Ga.
Posts: 10
|
Re: problems with wiring
Do I need to add a stater solenoid to this install??
|
06-15-2016, 02:40 PM | #8 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: problems with wiring
what are the 4 terminals labeled on the back of the key switch you have? there should be numbers or letters, please post those. yes you will need a starter solenoid. also verify your switch is off-on-start and not just and off-on, could also be acc-off-on-start like a car.
|
06-15-2016, 02:44 PM | #9 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: problems with wiring
picture might even be better.
|
06-15-2016, 07:11 PM | #10 |
Not Yet Wild
Join Date: Apr 2016
Location: central Ga.
Posts: 10
|
Re: problems with wiring
Here is the pic.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring problems | Electric EZGO | |||
another try! RXV wiring problems | Electric EZGO | |||
Ez go wiring problems. | Electric Club Car | |||
wiring problems | Members Rides | |||
wiring problems | Electric EZGO |