08-09-2016, 08:06 PM | #1 |
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
stock rope pull on Clone
The 460 Clone package from Vegas comes with a rope starter pull cord. For grins, I tried to see if you can start the clone with the rope only. Good Luck with that! Unless you can actuate a compression release, I couldnt pull it thru. Anyone else tried this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-09-2016, 08:13 PM | #2 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: stock rope pull on Clone
I tried, almost took my arm off and promptly broke the rope.
On the stock clones they pull start a lot easier |
08-09-2016, 08:40 PM | #3 |
Gone Wild
Join Date: Sep 2011
Location: ARIZONA
Posts: 476
|
Re: stock rope pull on Clone
Put 1.3 rockers on it with the stock compression release its easy. If you are running a cam without the release it's near impossible.
|
08-09-2016, 08:47 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: stock rope pull on Clone
My stock 420 pulled easy enough, with 1.3 rockers it was even easier. But hey, its even easier yet to use the pedal I did try it just to make sure it worked in case of emergency. I also had the screw fall out of my stock clone rope handle and had to modify it some, vibration I am sure. I thought the Vegas did have comp release? Though some came with a different came I also heard.
|
08-09-2016, 08:52 PM | #5 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: stock rope pull on Clone
I have started my VC 460 with a milled head many times with the pull cord.I also have the 1.3 rockers on mine. But with the valve lash set correctly it should spin easily. I did reclock the starter unit so the handle is in the 12 o clock position.
|
08-10-2016, 09:20 PM | #6 |
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
Re: stock rope pull on Clone
I tried it for a just in case the battery was too weak to start it. valve lash is set at .003I'll try the 12:00 rotation as well.
|
08-11-2016, 08:08 PM | #7 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: stock rope pull on Clone
Set the lash really small, and check it after a while it gets larger on break in.
|
08-12-2016, 02:11 PM | #8 |
Getting Wild
Join Date: Sep 2015
Posts: 93
|
Re: stock rope pull on Clone
best way to pull it is to get it past the compression stroke, pull starts fairly easily after that.
|
08-13-2016, 03:22 PM | #9 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: stock rope pull on Clone
I have heard with some people the thing on the cam was bent and gave less release, this usually only an issue with a cheater or aftermarket cam.
|
08-13-2016, 06:23 PM | #10 |
Getting Wild
Join Date: Oct 2010
Location: Haslet, Tx
Posts: 92
|
Re: stock rope pull on Clone
It's a standard VC Clone 460. No special cams. Valve lash is setat .003. I'll pull it past the compression mode and try that.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clone 3A and stock generator? | Clone Engine Swaps | |||
Need to pull Clone out. | Clone Engine Swaps | |||
Confused about how hard my stock gas EZGO should pull, problem or normal? | Gas EZGO | |||
What Carb to replace stock clone | Clone Engine Swaps | |||
Super cheap 12v LED rope style lights | Electric Club Car |