|
03-26-2017, 11:30 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
VRX 460 kit on 93 carrier, 84 Marathon.
Just a few clearance issues on this and I'll be on my way. Anyone else put the four stroke axle in an older 2-stroke Kart? I am going to extend the mounting tabs where it pivots at the front.
 Sent from my XT1254 using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-26-2017, 11:31 PM
|
#2 | |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
Quote:
 Sent from my XT1254 using Tapatalk |
|
|
|
|
|
03-27-2017, 10:01 AM
|
#3 |
|
Crazy Ole Man
 Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
Why not just get a shorter belt for the starter/generator? That's a lot of work for such a small problem.
|
|
|
|
|
03-27-2017, 11:17 AM
|
#4 |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
Not enough space for that.... Unless maybe I bring the whole thing way up.
Sent from my XT1254 using Tapatalk |
|
|
|
|
03-27-2017, 11:20 AM
|
#5 |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
Starter, that is. I'll look at it again but if I'm going to Fab, I may as well lengthen the engine carrier a few inches. I also ordered two and a half by 16 coils to replace the for 14s. I only had an inch or so clearance between the air filter and the frame crossbar at the back of the seat. Only a little bit more clearance to the cylinder head.
Sent from my XT1254 using Tapatalk |
|
|
|
|
04-01-2017, 02:19 PM
|
#6 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
Most people try to center the tire in the wheel well, and if they plan to go larger tire they move pivot back some (and drop it lower to help level things with the larger lift they need). That would be my recommendation and if you have a clearance issue try to deal with it in some other way. If you do move it back check tire position closely before you weld it up. If its all good then no problem. Also make sure your brake cables reach.
|
|
|
|
|
04-01-2017, 03:05 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
I've welded 2 inch back tabs on the front of my previous marathon for that very reason. The generator does not have enough room.
Make sure you check your brake lines after so they have a little slack May have to take them out of the holders on the swing arm and re route them a little |
|
|
|
|
04-01-2017, 03:06 PM
|
#8 |
|
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
I'd post a pick but I sold that cart last year.
|
|
|
|
|
04-01-2017, 11:12 PM
|
#9 |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
 . After taller springs. Sent from my XT1254 using Tapatalk |
|
|
|
|
04-01-2017, 11:15 PM
|
#10 |
|
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: VRX 460 kit on 93 carrier, 84 Marathon.
 . After 3" longer tabs on the swingarm. Looks centered enough to me. Gained clearance all around. I will move the lower spring perches forward next. Sent from my XT1254 using Tapatalk |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Big Block Carrier | Big Block Talk! | |||
| Ezgo Marathon Diff Carrier for sale cheap. | Golf Carts and Parts | |||
| bag carrier? | Gas Harley Davidson | |||
| Cargo Carrier | Design Center | |||
| WTB G9 carrier x's 2 | Golf Carts and Parts | |||
Linear Mode
