01-14-2018, 08:02 PM | #1 |
Not Yet Wild
Join Date: Nov 2017
Posts: 4
|
Need Advice/Help on Gearing
Hey guys I'm doing a 420cc predator swap on my 1997 club car. I've used a lot of the threads on here for help . My question is gearing. I'm using a 40 series torque converter with a jackshaft. I would like to be around 30mph . The cart has 6 inch lift with 22x11x12s . Also I would like to leave the governor on it for now because my 10 year old will be driving it also. I will be using #50 chain and would like some input on what sprockets to use.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2018, 10:56 AM | #2 |
Not Yet Wild
Join Date: Nov 2017
Posts: 4
|
Re: Need Advice/Help on Gearing
Anyone? Anyone?
|
01-18-2018, 12:22 AM | #3 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: Need Advice/Help on Gearing
http://www.diygokarts.com/speed-calculator.html 10 on the jack shaft & 60 on the axle will be around 39 mph with 22" tires. http://www.staton-inc.com/store/inde...product&id=823 good place for sprockets. Hope this helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Gearing | Clone Engine Swaps | |||
motors and gearing | Extreme DC! | |||
Gearing, advise??? | Big Block Talk! | |||
Gearing | Big Block Talk! | |||
What does gearing affect? | Golf Cart Racing |