Lifan 420 swap, help pls

Skink

Hey guys, I ordered the big block kit from Vegas carts. I’m about halfway done, have a question about hooking up the throttle. Does anyone have a picture they can post please? To be perfectly honest, I’m not certain where it goes.

Thanks for your help!!




That, and I know my fuel pump Is powered by compression in the motor? How do I hook that up?




Sent from my iPhone using Tapatalk

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Macsman56

you have the throttle hooked up backwards, cable comes around from flywheel side most times. and if there is an aluminum piece on the end of the cable you have to cut it off as close as you can to it and run it through the nut that has the phillips head on it.
and to hook up the fuel pump you hook it into the vacuum line coming from the valve cover. ill send a picture when i get home of how mine is

Skink

10-4, Thank you!

I figured out the vacuum line, was missing a piece in the kit, found it and it's now installed.

Macsman56

not a problem at all! ive done a couple swaps for customers.