lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
Thread Tools Display Modes
Unread 03-19-2018, 08:52 AM   #1
Gone Wild
 
Rooster59's Avatar
E-Z-GO
 
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,935
Default VC625 Carb Studs

I could use a little help from someone who has added a filter adapter to their Vegas 625 or currently has their 625 carb off. I need to know the length of the stock VC625 carb studs. I am removing the stock airbox and adding a velocity stack/filter adapter to mine. I ordered the long 132 mm studs from VC but they are obviously way too long without even removing anything on my engine.

All I need is about 1/2" to 3/4" longer than stock. The 328VS is not like many adapters that require an inch or so longer studs. You can see by the picture the nuts are recessed into the adapter quite a ways. The stock studs are just shy of allowing the tubular nuts to start a thread.

I can get studs from 106mm to 132 mm but it looks like somewhere around 113mm would be great. I would like to confirm without removing the airbox again and letting my cart sit idle while I wait for the studs to arrive.

Thanks in advance if you can help.
Attached Images
File Type: jpg EC Carbs 328VS Velocity Stack.jpg (24.6 KB, 0 views)
Rooster59 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-19-2018, 10:47 AM   #2
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 6,021
Default Re: VC625 Carb Studs

I have the 106 mm on my 460 with the 625 carb. I still had to cut them down further BUT I am using the VC billet intake manifold as my K&N filter adapter. Pics on page 13 in my Vc460 build thread.
raydhd is offline   Reply With Quote
Unread 03-19-2018, 12:56 PM   #3
Gone Wild
 
Rooster59's Avatar
E-Z-GO
 
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,935
Default Re: VC625 Carb Studs

If push comes to shove I guess I could always cut and rethread the long studs I have from VC.
Rooster59 is offline   Reply With Quote
Unread 03-22-2018, 11:12 AM   #4
Not Yet Wild
 
roadtech's Avatar
Yamaha
 
Join Date: Nov 2017
Location: sun city west
Posts: 27
Default Re: VC625 Carb Studs

Rooster
I just saw this. I am setting up a EFI on my 625 G2 so I have the studs out. Hope this helps.
Attached Images
File Type: jpg stud.jpg (128.6 KB, 0 views)
File Type: jpg throttle body.jpg (146.4 KB, 0 views)
roadtech is offline   Reply With Quote
Unread 03-22-2018, 11:15 AM   #5
Gone Wild
 
Rooster59's Avatar
E-Z-GO
 
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,935
Default Re: VC625 Carb Studs

Hey thanks roadtech. It looks like your stock studs are about 4.25" long. That helps. I think I saw some that were about 4.5" long at one of the hi-perf kart vendors. That should give me enough to work with.

That efi looks cool. Can't wait to hear about your results.
Rooster59 is offline   Reply With Quote
Unread 03-22-2018, 01:12 PM   #6
Gone Wild
 
Rooster59's Avatar
E-Z-GO
 
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,935
Default Re: VC625 Carb Studs

Found some genuine Honda studs 123mm long. That is right at .50" longer. Should do the trick.
Rooster59 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
96 EZGO VC625 Conversion Clone Engine Swaps
G2 VC625 install Big Block Talk!
VC625 wiring help Big Block Talk!
WTB Harley carb studs Gas Harley Davidson
Harley Carb Studs Golf Carts and Parts


All times are GMT -5. The time now is 03:57 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.