Club car with predator 670

marx.menard@yahoo.com · 07-28-2018, 07:18 AM

Should have posted earlier but engine is installed with a 670. Big engine for a small compartment

marx.menard@yahoo.com · 07-28-2018, 08:14 AM

More pics

sho305 · 07-30-2018, 11:09 AM

Nice project, how does it run? There are a few 670 installs on here but not a lot. I am considering one if I ever find another cart to do, and time to do it lol.

marx.menard@yahoo.com · 07-30-2018, 11:46 AM

I have it installed and wired up. From what I can read here,I will need to adjust the idle jets for a smoother idle. I'm haveing issues with throttle hook up. All I have is the throttle rod not the box that usually comes on gas carts.

But from what I can tell it will be a beast with torque to spare.

sho305 · 07-31-2018, 09:48 AM

IIRC the box runs the starter/gen? You don't need it if using the engine's starter. You may need to make a lever to run the throttle, I did that on my clones.

marx.menard@yahoo.com · 07-31-2018, 05:24 PM

Would you send me a pic of your lever set up please

sho305 · 07-31-2018, 09:03 PM

There is one posted here, it went on the engine upside down but you can see how it worked. One lever was for choke the other for throttle with the tiny holes in it. If it moves the same direction you just put the pivot on the end. It had return springs on it, it used the stock rod to the clone carb, made a larger rod for choke.
http://www.buggiesgonewild.com/clone...lone-bb-3.html

Now I run an intake around to the other side of the engine and put a 32mm CV carb on it, but have a 30mm pumper slide to try the CV had issues at WOT but runs nice just not sure I'm getting it all.

marx.menard@yahoo.com · 08-02-2018, 05:53 PM

Thanks.

marx.menard@yahoo.com · 08-04-2018, 07:52 AM

Any clutch tuning advice I want to come off idle to engage the drive clutch. I have a 780 with a cv tech heavy duty driven. Right now the drive has blue springs and blue roller. The driven has the standard spring. All
From vegas carts

raydhd · 08-04-2018, 12:15 PM

You might want to try the lower tension green springs. I am running those with the 90 gram rollers on my 460. With the 670 you might want to try them with the 130 gram rollers I am guessing you have presently.

07-30-2018, 11:09 AM	#3
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,445	Re: Club car with predator 670 Nice project, how does it run? There are a few 670 installs on here but not a lot. I am considering one if I ever find another cart to do, and time to do it lol.

07-30-2018, 11:46 AM	#4
marx.menard@yahoo.com Not Yet Wild Join Date: May 2018 Posts: 28	Re: Club car with predator 670 I have it installed and wired up. From what I can read here,I will need to adjust the idle jets for a smoother idle. I'm haveing issues with throttle hook up. All I have is the throttle rod not the box that usually comes on gas carts. But from what I can tell it will be a beast with torque to spare.

07-31-2018, 09:48 AM	#5
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,445	Re: Club car with predator 670 IIRC the box runs the starter/gen? You don't need it if using the engine's starter. You may need to make a lever to run the throttle, I did that on my clones.

07-31-2018, 05:24 PM	#6
marx.menard@yahoo.com Not Yet Wild Join Date: May 2018 Posts: 28	Re: Club car with predator 670 Would you send me a pic of your lever set up please

07-31-2018, 09:03 PM	#7
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,445	Re: Club car with predator 670 There is one posted here, it went on the engine upside down but you can see how it worked. One lever was for choke the other for throttle with the tiny holes in it. If it moves the same direction you just put the pivot on the end. It had return springs on it, it used the stock rod to the clone carb, made a larger rod for choke. http://www.buggiesgonewild.com/clone...lone-bb-3.html Now I run an intake around to the other side of the engine and put a 32mm CV carb on it, but have a 30mm pumper slide to try the CV had issues at WOT but runs nice just not sure I'm getting it all.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-02-2018, 05:53 PM	#8
marx.menard@yahoo.com Not Yet Wild Join Date: May 2018 Posts: 28	Re: Club car with predator 670 Thanks.

08-04-2018, 07:52 AM	#9
marx.menard@yahoo.com Not Yet Wild Join Date: May 2018 Posts: 28	Re: Club car with predator 670 Any clutch tuning advice I want to come off idle to engage the drive clutch. I have a 780 with a cv tech heavy duty driven. Right now the drive has blue springs and blue roller. The driven has the standard spring. All From vegas carts

08-04-2018, 12:15 PM	#10
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,642	Re: Club car with predator 670 You might want to try the lower tension green springs. I am running those with the 90 gram rollers on my 460. With the 670 you might want to try them with the 130 gram rollers I am guessing you have presently.

Similar Threads
Thread	Forum
198? club car predator 212	Clone Engine Swaps
670 Predator	Clone Engine Swaps
Predator 420 in a club car who has one	Clone Engine Swaps
94 Club Car - Electric to Predator 212 gas	Members Rides
Predator 420 into Club Car	Gas Club Car