lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
Thread Tools Display Modes
Unread 01-14-2019, 02:36 AM   #1
Crazy Ole Man
 
Shepard's Avatar
Yamaha
 
Join Date: Jan 2016
Location: Owego NY
Posts: 1,955
Arrow 24mm 3 Circuit Clone Carburetor Maximized

We all agree -- the better a clone breathes the better it runs. After all the money I've spent on carburetors I decided to keep it as simple as I could. I bought a 24mm carb from Vegas that I could modify as much as possible an still have it for all round use. You can see how restricted the stock car with the choke is. There's a large flat spot on the bottom of picture 6163. The throat has been opened up to fit the velocity and the choke has been removed in picture 6162.
I modded the emulsion tube at the top to about 45 degrees. This may help when the air speed slows as it doesn't have to lift the fuel as high as if weren't cut. At the same time I'm hoping this idea will help the overall drive ability using this carburetor. At this time I bought a primer pump bubble to aid in cold starting. i'm working on an idea of a enriching device to aid in cold starting if the pump doesn't work.
Attached Images
File Type: jpg DSCN6163.JPG (230.4 KB, 0 views)
File Type: jpg DSCN6162.JPG (234.0 KB, 0 views)
File Type: jpg DSCN6153.JPG (235.1 KB, 0 views)
File Type: jpg DSCN6158.JPG (243.3 KB, 0 views)
File Type: jpeg Primer Pump.jpeg (10.8 KB, 0 views)
Shepard is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-14-2019, 09:07 AM   #2
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 5,058
Default Re: 24mm 3 Circuit Clone Carburetor Maximized

On another project I used an electric fuel pump with a momentary switch shooting fuel into the carb throat.I did try a primer bulb first but this did not work well enough for me. The electric priming circuit work great. Luckily with using your EXP-S carb with the S/G starting system this was not needed on my cart. She fired up in 18 degree weather the other day. Boy you sure did open that carb up.
raydhd is online now   Reply With Quote
Unread 01-14-2019, 07:16 PM   #3
Crazy Ole Man
 
Shepard's Avatar
Yamaha
 
Join Date: Jan 2016
Location: Owego NY
Posts: 1,955
Default Re: 24mm 3 Circuit Clone Carburetor Maximized

Quote:
Originally Posted by raydhd View Post
Boy you sure did open that carb up.
Yes - it's been opened up to fit the velocity stack shown in the picture. I see starting to be a problem without the choke. My toy starts hard when cold, it's tuned to operate properly when warm. Runs great after its warm. I have a primer bubble pump to feed it with when its cold.
Shepard is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
24mm Experimental Carburetor Clone Engine Swaps
24mm bored 3-circuit carb for the gx390 & 420/440/460 clones Clone Engine Swaps
Nitrous on 24mm bored 3-circuit carb Clone Engine Swaps
24mm Bored 3-Circuit Carb Fuel Inlet Clone Engine Swaps
Clone Carburetor Adjusters Clone Engine Swaps


All times are GMT -5. The time now is 05:52 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.