05-28-2019, 08:14 PM | #1 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Vegas torque cam
Who all out there is running the VC (isky) torque cam how is it ? How does it rev ? Any problems? Would u buy it again ? Any and all input appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2019, 08:55 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Vegas torque cam
I don't think it is produced by Isky. It works across the rpm range and with 1.3 ratio rocker arms along with the moly push rods and comp cams springs is good for at least 5600 rpms. I don't of any cam that is more suited for clone power carts and @ $50 it is a real deal. P.S. Make sure also that at a minimum that you up grade the slip locks on the valves that you have lash caps on both valves. P.P.S This all assumes that you have a billet connecting rod or don't do it.
|
05-28-2019, 09:27 PM | #3 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: Vegas torque cam
Geoff told me a couple of years ago it was designed and built by Isky
|
05-28-2019, 09:28 PM | #4 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: Vegas torque cam
Ray are u running one I was looking for feedback
|
05-29-2019, 12:21 AM | #5 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Vegas torque cam
They come as OEM in the last series of the 460's VC [2016-2017] -- I have one with a dished piston and one with a flat top piston. Because of the increased rpm I built the heads - stainless valves - 50lb springs - titanium spring caps and split keepers. Extreme porting with a modified clone carb and these simple cams make for great fun with lots of torque. With the gearing I have I get 35 mph @ 3600 rpm.
|
05-29-2019, 12:31 AM | #6 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: Vegas torque cam
Shepard Wow that’s wat I’m looking for positive feedback how do they rev ?
|
05-29-2019, 08:53 AM | #7 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Vegas torque cam
|
05-29-2019, 09:35 PM | #8 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: Vegas torque cam
So only one guy running this cam ???
|
05-29-2019, 11:04 PM | #9 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Vegas torque cam
|
05-30-2019, 12:22 AM | #10 |
Gone Wild
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
|
Re: Vegas torque cam
Shepard I just bought a 460 and it looks like it has a stock cam also I was supposed to get a bored 24mm carb and I have a stock 21mm 390 carb
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Vegas 460 in Club Car help | Clone Engine Swaps | |||
need torque LBS and torque pattern for 2000 club car ds gas transaxle | Gas Club Car | |||
Vegas 440 | Videos | |||
D&D Speed&Torque vs. D&D High Torque | Electric EZGO | |||
When it get to HOT in Las Vegas.... | Gas golf carts |