Finished my EZGO swap

bjorn773 · 08-17-2019, 01:51 PM

Finished up my 301 swap today. I made some brackets for the club car roof out of some old chainlink top rail. Put a backseat off ?? on it, had to make the backrest. Ordered a new carb from Amazon, fitted it with an adjustable main. I tried with no choke, but added one later. To me it's nice to tweak it while driving if necessary. It runs great, way faster than I anticipated. It'll work just fine for cruising around our acreage. I appreciate all the help everyone on here provided during the process!!

Sent from my SM-G930V using Tapatalk

slonomo · 08-23-2019, 06:31 PM

Is this a clone engine? Can't tell. You say 301? Is that an ezgo engine? Looks like you got the 94c clutch. What engagement rpm are at? What are your puck weights?

bjorn773 · 08-23-2019, 11:13 PM

Quote:

Originally Posted by slonomo

Is this a clone engine? Can't tell. You say 301? Is that an ezgo engine? Looks like you got the 94c clutch. What engagement rpm are at? What are your puck weights?

It is a 94c clutch... 6 pucks are approximately 50g each. The engine is a HF Predator 301(honda clone). I haven't checked rpm.

Sent from my SM-G930V using Tapatalk

slonomo · 08-24-2019, 09:34 AM

Gotcha! I thought I remembered the EZGO Robins twin was 295cc. Hows the power compared to stock? Does it feel better or similar?

bjorn773 · 08-25-2019, 09:41 AM

I can't say because I traded 2 cases of beer for a rolling chassis. The engine was missing. It's pretty fast since there is no governor.

Sent from my SM-T820 using Tapatalk

08-17-2019, 01:51 PM	#1
bjorn773 Not Yet Wild Join Date: Jun 2019 Posts: 61	Finished my EZGO swap Finished up my 301 swap today. I made some brackets for the club car roof out of some old chainlink top rail. Put a backseat off ?? on it, had to make the backrest. Ordered a new carb from Amazon, fitted it with an adjustable main. I tried with no choke, but added one later. To me it's nice to tweak it while driving if necessary. It runs great, way faster than I anticipated. It'll work just fine for cruising around our acreage. I appreciate all the help everyone on here provided during the process!! Sent from my SM-G930V using Tapatalk
bjorn773 Not Yet Wild Join Date: Jun 2019 Posts: 61

08-23-2019, 06:31 PM	#2
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,436	Re: Finished my EZGO swap Is this a clone engine? Can't tell. You say 301? Is that an ezgo engine? Looks like you got the 94c clutch. What engagement rpm are at? What are your puck weights?

08-24-2019, 09:34 AM	#4
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,436	Re: Finished my EZGO swap Gotcha! I thought I remembered the EZGO Robins twin was 295cc. Hows the power compared to stock? Does it feel better or similar?

08-25-2019, 09:41 AM	#5
bjorn773 Not Yet Wild Join Date: Jun 2019 Posts: 61	Re: Finished my EZGO swap I can't say because I traded 2 cases of beer for a rolling chassis. The engine was missing. It's pretty fast since there is no governor. Sent from my SM-T820 using Tapatalk
bjorn773 Not Yet Wild Join Date: Jun 2019 Posts: 61

Similar Threads
Thread	Forum
My Finished 2000 Ezgo	Members Rides
my 08 ezgo just finished lift	Members Rides
95 EzGo TXT almost finished!	Members Rides
Finished Up My EZGO	Gas EZGO
My 96 ezgo is finished!!!! (for now)	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum