Duromax 16hp in 05 TXT?

cb11

Wanted to check with you guys and see if this is the 16hp clone engine that alot of you guys have used in your swaps? If so what else will I need? Will the starter work? Choke cable? Throttle cable?

http://cgi.ebay.com/DUROMAX-16-HP-GA...QQcmdZViewItem

Thanks for the help,
Chris

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

rib33024

Check out these links--


http://www.buggiesgonewild.com/clone...omax-16hp.html


http://www.buggiesgonewild.com/gas-c...p-duromax.html



http://www.buggiesgonewild.com/clone...am-engine.html

cb11

I found those after I posted this, shoulda searched first. Guess the process is the same for an ezgo as it is for the yammy?

rib33024

Not sure about this, but some of the guys will be along to help you out on this,

sho305

I posted a swap into a yami G9
http://www.buggiesgonewild.com/gas-y...cs-thread.html

It was easy to get in there and mount, but very tight to the rear shock in this. The plumbing is a pain in the az (intake, exhaust), had to make linkages for throttle/choke. Runs great now though even with stock clutch, sometimes you can't hammer it from slow speeds/low rpm only half throttle until it gets moving better. I had it richer and it was fine but plug was black lol. I may be able to go richer not checked the plug too busy to work on carts lately. Guy says it runs great though, it has way more power but does not want to rev much more. Talking to a guy about a cam to put in when I do my cart, get some more rpm is all....a mild cam.