lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-02-2011, 10:10 AM   #1
mbolan
Not Yet Wild
 
Join Date: Dec 2010
Posts: 24
Default Ready to rumble

Just finished my Duramax install. Really surprised how straight forward it was. I retained as much original stuff as possible to reduce cost. Uses the stock clutch with a CPP adapter. The engine still starts from the gas pedal and uses the stock muffler. The only mod to the engine was the removal of the governor and the install of a brass barb in its place to connect the fuel pump. The Duramax air filter would not fit since the Club Car control box was in the way so I made an adapter out of an electrical LB style connector and it works great with a foam air cleaner. Basically all of the aluminum I had laying around so no cost there. The engine stand has an angle to it so that when the engine is installed it sits level. I paid $287 for the engine shipped to my door. The clutch adapter was about $50 shipped. The air cleaner was $20 shipped. I made the exhaust pipe from 1 1/4 electrical EMT conduit. It runs great so far. Thanks to all who have posted pictures and shared ideas. It really made my conversion a lot easier.
Attached Images
File Type: jpg cart.JPG (40.0 KB, 184 views)
File Type: jpg Brackets.JPG (35.6 KB, 249 views)
File Type: jpg linkage.JPG (46.3 KB, 265 views)
File Type: jpg generator installed.JPG (31.2 KB, 296 views)
mbolan is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-02-2011, 10:32 AM   #2
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,997
Default Re: Ready to rumble

Nice work!!!

TheNewGuy is offline   Reply With Quote
Old 02-02-2011, 01:55 PM   #3
AirJunky
Gone Wild
 
AirJunky's Avatar
E-Z-GO
 
Join Date: Jul 2009
Location: Liberty Lake, WA.
Posts: 1,762
Default Re: Ready to rumble

Nicely done. Love the fact that you retained the factory starter/generator in it.

So hows it perform? Any idea how much it improved acceleration or top speed yet?
AirJunky is offline   Reply With Quote
Old 02-02-2011, 02:04 PM   #4
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
Default Re: Ready to rumble

Looks very well thought out. Keep an eye on the aluminum brackets for cracks.
crash12888 is offline   Reply With Quote
Old 02-02-2011, 04:19 PM   #5
mbolan
Not Yet Wild
 
Join Date: Dec 2010
Posts: 24
Default Re: Ready to rumble

It runs strong! A lot better than the old KF82. I really haven't pushed it yet since I want to break it in first. But I can tell you there is no comparison between the new motor and the old motor. The aluminum is a 6061 T6 alloy. Its great stuff. Both strong and weldable. I've used the same grade to fabricate motor mount plates in super gas race cars that hit hard and never had a problem. The mounting system still retains the original rubber isolators and the rubber snubber up front so there really is not a lot of shock on the mounts. I have a lot of confidence in all of the brackets but will keep everyone posted if there are any problems.
mbolan is offline   Reply With Quote
Old 02-02-2011, 05:48 PM   #6
BLACK DEATH
Gone Wild
 
BLACK DEATH's Avatar
Club Car
 
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
Default Re: Ready to rumble

How much to make me the brackets for the starte gen setup or even it all so I can put my clone in my cart?
BLACK DEATH is offline   Reply With Quote
Old 02-02-2011, 07:08 PM   #7
mbolan
Not Yet Wild
 
Join Date: Dec 2010
Posts: 24
Default Re: Ready to rumble

Black Death I've got to decline. My cart is rolling again. I didn't make any drawings so I would have to disassemble everything to get dimensions. This project already took 2 weekends away from my real winter project. I'm doing a frame off rotisserie restoration on a 65 GTO. Really its not to hard to do yourself. I welded some on my brackets but you could also bolt them together if you can't weld aluminum. Really you can make the same parts from mild steel if you don't have access to aluminum. There is no specialized milling or lathe machining required. Everything was done using saw cuts.
mbolan is offline   Reply With Quote
Old 02-02-2011, 09:02 PM   #8
BLACK DEATH
Gone Wild
 
BLACK DEATH's Avatar
Club Car
 
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
Default Re: Ready to rumble

No problem, i can weld steel, not aluminum.
BLACK DEATH is offline   Reply With Quote
Old 02-02-2011, 09:05 PM   #9
bifferd
Gone Wild
 
bifferd's Avatar
E-Z-GO
 
Join Date: Mar 2009
Location: wisconsin
Posts: 431
Default Re: Ready to rumble

nice job do you have a lot more power
bifferd is offline   Reply With Quote
Old 02-03-2011, 08:47 PM   #10
mbolan
Not Yet Wild
 
Join Date: Dec 2010
Posts: 24
Default Re: Ready to rumble

Bifferd it runs really good compared to the kf82 smoke bomb that was in it before. It really pulls like a big block in a car. You can be rolling along and push the pedal down and it growls and pulls. Kind of cool! I really haven't held it down too long since it only has about 5 miles on it. I suspect it will top out around 30mph since I've done nothing to increase rpm but put taller tires on it. But I promise it will get there a lot quicker than any original type engine. The only engine mods are a good non-restrictive air filter/intake and the removal of the governor. The exhaust is really free flowing right up to the muffler since I built the header out of 1 1/4 pipe. The muffler drops back to a 1" inlet and an even smaller outlet . Its a stock Club Car muffler. I like it though since its quiet. I'm pretty sure if I cut the outlet pipe off and welded on a larger one it would flow better but then I would probably have to rejet the carb. To be honest with you it runs plenty good as is. Someday if I get bored and have time I will play around.
mbolan is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
Getting ready to tear into our G1! Gas Yamaha
clubcar with rumble in differental Electric golf carts
Rumble on slow down Gas EZGO
what do you all think of the rumble bee ?? Electric Club Car


All times are GMT -5. The time now is 05:11 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.