duromax 16hp

mannyvillegas

Would the stock primary clutch on my 350 cc Workhorse fit in the Duromax 16hp without need to modify?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

bob-n-holly

I am doing the same swap right now. I know you need the clutch adapter and idle spring from carts parts plus a sponser on here there great to deal with

Beverage

Do you have any pics, I'm thinking about installing a clone in my workhorse. Will the cpp big block engine adapter work. I started to install one before but the cylinder head seemed to hit the trans axle. If I new I could by the cpp frame and clutch, pick up the engine from HF and bolt that together I'm in. Could you advise me from your experience, or is there fabrication involved other than cables hook up.

westmx5

I'm doing this exact swap as we speak on a 2000 Workhorse. I will have plenty of pics along the way. I have the old 350 out and should have the cradle this afternoon or tomorrow. I hope to have the new engine bolted in this weekend. I was told by Tom at CCP that the stock clutch would work with his adapter and the torque spring. I dont think I will have to cut the crank at all.

I will keep everyone posted.

Thanks,
Bill