420 clone question

fabricatorjay

I got a 91 cc and want to put in a 420 clone,i have the stock clutch,what do I do to get the stock clutch to work on a 420 straight shaft,does any one sell a clutch that will work,my old motor had a tapered shaft,i think someone sells a adapter but im not sure,if anyones done that swap please let me know what I need to do...thanks in advance.......jay

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

turbof250

I'm pretty sure cartpartsplus carries the adaptor you are looking for.
http://www.cartpartsplus.com/tapered-clutch-adapter

Streetbu

^X2^ to what turbo said. I bought that adapter and used it, works great!

fabricatorjay

do you guys know offhand how much shaft you cut off and what size drill and tap you used,thanks guys........jay

geoffw

CPPs adapter works wonders, we use them on all of our builds that utilize the stock clutch!

If you have an EZGO you usually cut 1/4" off, Club Cars usually dont need to be cut....It depends on the engine you have though.