lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
Thread Tools Display Modes
Unread 09-10-2013, 09:48 AM   #1
Not Yet Wild
Club Car
 
Join Date: Sep 2013
Location: Kansas City
Posts: 11
Default What Taper on Stock ClubCar clutch (Specs for clone engine)

Anyone know what the stock taper is on the FE290-400 clockwise rotation club car clutches are? I am looking at a couple of options and the manufacturer has tapered shaft engines and straight shaft engines - Ideally it would be able to have the stock clutch bolt right up to it so I have to match taper and length, etc.

Ideally if someone knows of a drawing of the stock kawasaki shaft on the club car engines similar to the one attached it would really help me out!

OK - found this on line after searching for hours and finally found the reference - can anyone validate that the tapered shaft referenced in the FE350 Data Sheet is the one used on the CC clutches?
http://www.manualslib.com/manual/375...50.html?page=2
Attached Images
File Type: jpg Engine-Taper-shaft.jpg (13.8 KB, 0 views)
Attached Files
File Type: pdf fe350__datasheet.pdf (171.7 KB, 0 views)
bwiencek is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-10-2013, 11:19 AM   #2
Gone Wild
Yamaha
 
Join Date: Sep 2011
Location: ARIZONA
Posts: 474
Default Re: What Taper on Stock ClubCar clutch (Specs for clone engine)

Stock CC use what is called a 30mm 1:10 taper. Most all carts do.

The one pictured is for a different application
fstg21 is offline   Reply With Quote
Unread 09-10-2013, 12:48 PM   #3
Not Yet Wild
 
Join Date: May 2013
Posts: 23
Default Re: What Taper on Stock ClubCar clutch (Specs for clone engine)

You can just purchase the adapter from CPP and use your factory clutch on a 1" straight shaft
wwright85 is offline   Reply With Quote
Unread 09-10-2013, 08:39 PM   #4
Gone Wild
 
geoffw's Avatar
Club Car
 
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
Default Re: What Taper on Stock ClubCar clutch (Specs for clone engine)

The shaft in that picture isnt even close to what youd need. Youll need a 1:10 x 30mm as was said above.
geoffw is offline   Reply With Quote
Unread 09-12-2013, 02:01 AM   #5
Vegas modded 420
 
sho305's Avatar
Yamaha
 
Join Date: Jun 2009
Location: West MI
Posts: 14,756
Default Re: What Taper on Stock ClubCar clutch (Specs for clone engine)

I put a CPP adapter on my clone for my yamaha clutch, worked great. Or you can buy a new aftermarket 1" clutch for a 1" shaft engine (typical standard for lawn engines). The adapter fits a 1" and converts it to a taper. There are few lawn engines with that taper if any but I have heard of a few, the small part of the taper is around 1".
sho305 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
The CLONE engine setup & specs thread Gas Yamaha
Clone engine specs Clone Engine Swaps
gx390 taper, fit stock CC clutch? Big Block Talk!
88 stock clutch going on a 16hp clone Big Block Talk!
Honda clone with stock clutch on a CC Big Block Talk!


All times are GMT -5. The time now is 02:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.