lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-17-2013, 07:44 PM   #1
Thimmesch1
Getting Wild
 
Join Date: Jul 2010
Posts: 125
Default duromax 16 questions

where do I connect a lead for a tachometer?
I can not find the lead that grounds to neutral when the pedal is let off for the engine to kill.
thanks
it is a 95 medalist
Thimmesch1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-17-2013, 10:46 PM   #2
dubs27
Gone Wild
 
dubs27's Avatar
E-Z-GO
 
Join Date: Dec 2008
Location: TALLAHASSEE FL,
Posts: 357
Default Re: duromax 16 questions

The tach I used hooked to the spark plug wire
dubs27 is offline   Reply With Quote
Old 11-18-2013, 08:50 PM   #3
Thimmesch1
Getting Wild
 
Join Date: Jul 2010
Posts: 125
Default Re: duromax 16 questions

through the boot & down the wire?
Thanks
Thimmesch1 is offline   Reply With Quote
Old 11-19-2013, 11:23 AM   #4
dubs27
Gone Wild
 
dubs27's Avatar
E-Z-GO
 
Join Date: Dec 2008
Location: TALLAHASSEE FL,
Posts: 357
Default Re: duromax 16 questions

no clamped on the wire
dubs27 is offline   Reply With Quote
Old 11-24-2013, 06:25 PM   #5
sho305
Vegas modded 420
 
sho305's Avatar
Yamaha
 
Join Date: Jun 2009
Location: West MI
Posts: 15,433
Default Re: duromax 16 questions

You need an inductive pick up like used on timing lights. Equus makes a nice one for around $60 (a tach). It clamps on the plug wire. If your cart had a 12v powered ignition like my yamaha with a CDI and coil/etc, then you put a relay on the pedal wire and hook the relay to ground the kill wire on the clone all the time. Then it un-grounds it to run when you use the pedal. Any bosch style relay the relays and plugs/harness are about $3 each on amazon. Older GM cars have banks of them behind the headlights on many models, but you need the 5 pin ones. They usually look like a 1" cube.
sho305 is offline   Reply With Quote
Old 11-24-2013, 07:02 PM   #6
pachanga90
I Refuse To Get Stuck!!!
 
pachanga90's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
Default Re: duromax 16 questions

You can get the 5pin relays at any auto parts store.some even have a mount tab on them.hope this helps.
pachanga90 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Clone Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
duromax 16 max rpm Clone Engine Swaps
duromax won't cut off Clone Engine Swaps
G14, 16hp duromax install questions Gas Yamaha
DuroMax? Clone Engine Swaps
DuroMax 16 Hp Clone Engine Swaps


All times are GMT -5. The time now is 05:14 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.