12-30-2013, 06:34 PM | #1 |
Gone Wild
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
|
Need Customer Opinions on our New Finishes!
We are going to be drastically improving the finish quality of our Kits and Parts that are made in house. We picked 2 options for our "Signature Finish":
1 - Polished Aluminum 2 - "Silver Vein" Powdercoated Steel The Aluminum is 1/16" thicker and still 1/2 the weight of the steel parts. Strength doesn't seem to be an issue here because the weight of the engines is relatively low. The Powdercoated Steel is HIGH QUALITY .004" thick, its sandblasted before being coated and will not scratch easily, nor will it flake off on corners. What are your opinions? If you're going to pay $75 for a nice motor/adapter plate, which would you rather have? -Geoff |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-30-2013, 07:12 PM | #2 |
Gone Wild
Join Date: Dec 2008
Location: TALLAHASSEE FL,
Posts: 357
|
Re: Need Customer Opinions on our New Finishes!
I like the aluminum
|
12-30-2013, 08:01 PM | #3 |
Not Yet Wild
Join Date: Nov 2013
Location: oklahoma
Posts: 3
|
Re: Need Customer Opinions on our New Finishes!
I would go with the aluminum jim
|
12-30-2013, 08:23 PM | #4 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Need Customer Opinions on our New Finishes!
I like the aluminum also. But no drain plug holes in it???
|
12-30-2013, 08:45 PM | #5 |
Gone Wild
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
|
Re: Need Customer Opinions on our New Finishes!
|
12-30-2013, 09:22 PM | #6 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Need Customer Opinions on our New Finishes!
Aluminum. No finish to fail, plus lighter weight and no rust.
Cheers! Andy |
12-30-2013, 09:49 PM | #7 |
Gone Wild
Join Date: Jun 2012
Location: Central NY
Posts: 1,020
|
Re: Need Customer Opinions on our New Finishes!
Looks like I'm being out voted but I like the vein coated steel. Weight isn't really a concern for me, durability both in the part and the coating is. Polished aluminum wont hold it's finish well being driven thru mud all the time and I'm not taking it all apart to re-polish it LOL
|
12-30-2013, 10:08 PM | #8 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Need Customer Opinions on our New Finishes!
Who the hell would re-polish it? If I got one it would be covered in mud and dead animals anyway.
Might get one anyway, not sure yet if I'm gonna have a problem with clutch alignment when I re-do my driven clutch. |
12-30-2013, 10:20 PM | #9 |
Gone Wild
Join Date: Jun 2012
Location: Central NY
Posts: 1,020
|
Re: Need Customer Opinions on our New Finishes!
So why get a nice shiny one if your not concerned about looks?
|
12-30-2013, 10:32 PM | #10 |
Gone Wild
Join Date: Oct 2013
Posts: 473
|
Re: Need Customer Opinions on our New Finishes!
I like the black.
Any chance you can post a picture of the plate with the 4" drop? |
|
|
Similar Threads | ||||
Thread | Forum | |||
To the common customer... | Electric Club Car | |||
1st service job for a customer | Gas EZGO | |||
Satisfied Customer | Gas Yamaha | |||
another happy customer! | Big Block Talk! |