01-06-2014, 11:58 PM | #1 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Vegas Carts 440 Kit 2002 EZGO Build
I am new here but I love the forum, lots of great info and I ordered a Vegas Carts kit today from reading about them on here, and I just wanted to thank Geoff for answering all my questions when I called him.
Hopefully I can post some pics of the install and maybe a video or 2. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-07-2014, 01:10 AM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
Welcome to BGW
every body here loves the pics, sounds like your going to have a good time building this cart, |
01-07-2014, 08:44 AM | #3 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
Keep the pics and new ideas coming! |
01-07-2014, 04:15 PM | #4 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
Does the vegas 440 engine come with an air filter? or what are you guys doing for an air filter?
|
01-07-2014, 04:35 PM | #5 |
Getting Wild
Join Date: Oct 2010
Location: Holland, Michigan
Posts: 112
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
it does come with an air filter in a steel enclosure, ive been running it on mine and it does just fine.
|
01-07-2014, 04:42 PM | #6 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
Thanks, I have been hunting for pics of a 440 with a air filter installed but could not find any.
Anyone have pics of their throttle setups? |
01-07-2014, 04:58 PM | #7 |
Getting Wild
Join Date: Oct 2010
Location: Holland, Michigan
Posts: 112
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
here is the stock air filter, and my throttle. i left the govener in, but that is soon to change once it warms up a bit!
|
01-11-2014, 02:41 PM | #8 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
Got the motor out of my cart yesterday, what a pain in the *** that was. I didn't see the bracket on the back of the motor that connects to the housing on the rear axle. then the motor got wedged in but long story short I finally got it out.
I removed the clutch off of the motor and thanks to reading post on here I went and got a 3/4" fine thread bolt that was 2" long and I pumped grease into the hole and worked some air out of the grease then repacked it again and it popped off. I missed my FedEx delivery today now I have to wait till Tuesday to get my motor and start installing it. |
01-14-2014, 04:18 PM | #9 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
received my kit today via fedex, all the bolts were loose in the box, the bag had ripped so I hope they are all there, If I would have known that the motors came unassembled I would have had them do it.
got ready to assemble my motor and found out that I was missing valve stem seals, so I called vegas carts and I guess there is only a seal on the intake valve and they were going to get it right out to me, this is a first for me usually there is a seal on the intake and exhaust valves, it looks to me that both valve guides are cut to accept seals? Just out of curiosity why would the exhaust not require a seal? |
01-14-2014, 04:18 PM | #10 |
Not Yet Wild
Join Date: Jan 2014
Location: NE Oklahoma
Posts: 31
|
Re: Vegas Carts 440 Kit 2002 EZGO Build
does anyone know what the torque specs are on the head bolts?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 Clone Build: Vegas Carts 440 | Clone Engine Swaps | |||
Vegas Carts 440 | Videos | |||
where did vegas carts go?.. | Clone Engine Swaps | |||
Vegas carts gx440 | Clone Engine Swaps |