08-09-2014, 11:56 PM | #1 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
Need help
Starter generator
A1 goes to ground A2 goes to f1 F2 goes to silenoid Volt regulator D+ goes to solenoid Df goes to starter gen df D- goes to ground Solenoid (I) goes to grounD (S) goes to keyswitch (A) goes to battery (B) goes to f2 on the s/generator What am i doing wrong here? When i turn the key all it does is click but s/gen won't spin. Been trying to fix all day out in this heat and still no clue to what's wrong. Its on a vc 460 with 12v club cart starter/solenoid & regulator so it should work together |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2014, 12:00 AM | #2 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
Key switch is a mower ignition switch idk if that matters
Sent from my LGL35G using Tapatalk 2 |
08-10-2014, 06:19 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: Need help
Don't think it matters but is D+ on the B terminal of the solenoid? When you hear the solenoid click is 12 volts on both a and b?
|
08-10-2014, 07:51 AM | #4 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
Yes on b, and No i got jumper cables to it running from my boat. Its just on b terminal
Sent from my LGL35G using Tapatalk 2 |
08-10-2014, 07:59 AM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: Need help
12 volts both sides?
|
08-10-2014, 08:25 AM | #6 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
12 V on the boat no battery on the cart just jumping straight to the solenoid and cart ground
Sent from my LGL35G using Tapatalk 2 |
08-10-2014, 08:44 AM | #7 |
Gone Wild
Join Date: Jun 2012
Location: Callahan,Florida
Posts: 337
|
Re: Need help
IS the micro switch for the accelerator pedal making? Not sure if you are still using it?
|
08-10-2014, 08:45 AM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: Need help
Understood but when the solenoid clicks, is there voltage on the starter side ? Or you touch the jumper cable to the other side does it turn over? Just because the solenoid clicks doesn't mean it is closing..
|
08-10-2014, 09:48 AM | #9 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
Ill check that. Gotta find my volt meter
Sent from my LGL35G using Tapatalk 2 |
08-10-2014, 09:56 AM | #10 |
Getting Wild
Join Date: Jun 2014
Location: fulton texas
Posts: 93
|
Nope no volts going to s/gen. So what do i do. I made sure nothing touching and all is tight.
Sent from my LGL35G using Tapatalk 2 |