lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Columbia ParCar


Post New Thread  Reply
Thread Tools Display Modes
Unread 07-08-2013, 11:27 PM   #1
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default 2003 eagle project no motor

I picked up a new project this weekend, A mint electric par car with no motor VIN # 2ED-30680-E3. I believe its a 2003 eagle, but that's all I know. someone removed the motor so I'm trying to figure out which one belongs in it, and where to find one.
It has one relay underneath and a sevcon controller # 633t43802. Also it has a 3 position key (rev-off-forward) and a run/tow toggle underneath. the rear axle is a Dana Spicer 12.44:1 #82652-02.
I am looking at all options here to get this cart mobile again, and really could use some assistance, I had read that a Yamaha motor might also cross over? Any help would be GREATLY appreciated!

THANKS IN ADVANCE!
sparky44 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-09-2013, 10:25 AM   #2
How Can I Help?
 
Tech Support's Avatar
 
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 936
Default Re: 2003 eagle project no motor

The unit came from factory with a Briggs Stratton/EPS motor. Looked like a flying saucer with fins. Part number for the motor was 69210-01 but it was discontinued. We do have some used motors and new brush kits, or you might find one from the folks on this site who collected the old parts when they upgraded to new.

If I were spending the money on a new motor anyway, I'd upgrade to a new controller too and bring the cart up to current levels.
Attached Images
File Type: jpg ACE (Sevcon) plug info.jpg (66.2 KB, 0 views)
Tech Support is offline   Reply With Quote
Unread 07-09-2013, 11:52 AM   #3
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default Re: 2003 eagle project no motor

Thanks for for response tech, although I had hoped for better news, I am glad I have a direction to head now. What are a used b&s with a brush kit worth, vs. A new controllerand motor combination?
What would be an example of a controller, motor combination that would fit my cart? Thank you for your expertise, this is my first controller system rebuild.
sparky44 is offline   Reply With Quote
Unread 07-11-2013, 02:14 PM   #4
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default Re: 2003 eagle project no motor

Tech, who do I contact to inquire about your used motors? Would just like to explore all avenues. Thank you.
sparky44 is offline   Reply With Quote
Unread 07-12-2013, 10:03 AM   #5
How Can I Help?
 
Tech Support's Avatar
 
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 936
Default Re: 2003 eagle project no motor

Etek Motor
98042SP
$350.00

Ace Brush Card Assy
83284-01
$520.64
Tech Support is offline   Reply With Quote
Unread 07-15-2013, 04:43 PM   #6
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default Re: 2003 eagle project no motor

I've been doing a ton of research, and I cannot seem to come up with much information regarding these carts. I would like to upgrade the controller and the motor to todays specs, but I cannot come up with much information of what new motor and controller combination would replace my existing, without a complete rewiring of my system. Not that that would be out of the question, just a huge PITA. Has anyone else done this before?
It has a dana rear end with 12.44:1 gears 19 tooth spline input. I would think that other 19tooth spline motors would work, as long as I could get the correct rpm and torque.
PLEASE HELP!
sparky44 is offline   Reply With Quote
Unread 07-15-2013, 11:17 PM   #7
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default Re: 2003 eagle project no motor

I know a picture is worth a thousand words, so here is a few. Does anyone know if I can run a regular motor off of this controller? I was under the impression that this controller was programmed specifically for the etek. Any info would really help. Thanks.
Attached Images
File Type: jpg IMAG0224.jpg (98.4 KB, 0 views)
File Type: jpg IMAG0225.jpg (73.3 KB, 0 views)
File Type: jpg IMAG0227.jpg (184.6 KB, 0 views)
File Type: jpg IMAG0230.jpg (56.0 KB, 0 views)
File Type: jpg IMAG0221.jpg (178.1 KB, 0 views)
sparky44 is offline   Reply With Quote
Unread 07-16-2013, 08:33 AM   #8
How Can I Help?
 
Tech Support's Avatar
 
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 936
Default Re: 2003 eagle project no motor

Have you checked eBay?

http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

Actual Eteks and a substitute. We just upgrade controller and motor, but normal people like you and me who have to come up with our own cash need to be a little more frugal.
Tech Support is offline   Reply With Quote
Unread 07-16-2013, 03:26 PM   #9
Not Yet Wild
Columbia
 
Join Date: Jul 2013
Location: MN
Posts: 28
Default Re: 2003 eagle project no motor

So a standard style regen motor of stock quality would work with this controller?
sparky44 is offline   Reply With Quote
Unread 07-16-2013, 03:31 PM   #10
How Can I Help?
 
Tech Support's Avatar
 
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 936
Default Re: 2003 eagle project no motor

No. You'll notice the controller only has two connections, and the standard regen is 4 connections.
Tech Support is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Columbia ParCar


Thread Tools
Display Modes


Similar Threads
Thread Forum
2003 CLUB CAR FE 290 Motor for Sale Golf Carts and Parts
2003 Club Car DS motor, controller,etc.... Golf Carts and Parts
2003 ezgo half voltage at motor Electric EZGO
Par Car Eagle Motor Upgrade Columbia ParCar
My Philly Eagle Project Members Rides


All times are GMT -5. The time now is 05:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.