lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center
Design Center Shop tools, fabrication and Paint and Body



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-25-2016, 09:19 PM   #1
Not Yet Wild
 
Join Date: Sep 2011
Posts: 52
Default Tandem axle build

Hi fellow fabricators. I've been tossing around the idea of building a tandem axle cart lately and curious what is the best set up. The present cart I was thinking about converting to a 6 wheeler is a 48 volt DS carry all. It has a 8" double A arm lift on 25" tires. I don't have any practal reason to make it a 6 wheeler, it's just one of those just because projects. I only breefly thought about leading it 2 wheel drive but I figure I would be hassled to much for taking the easy way out. I was wondering what's the best way to power all 6 wheels. Should I use a single controller and 2 motors? 2 motors and 2 controllers. Are there any thing to worry about with sharing a 5k to 0 ohm throttle if I use two controllers? I was also wondering if I should make is selectable 2 or 4 wheel drive? If I use two controllers I just will toggle each on or off. If I use one controller the I figure I could interrupt the motor wires with contractors.
Any thoughts!
Fozzy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-28-2016, 07:50 AM   #2
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 15,828
Default Re: Tandem axle build

I have thought about a tandem axle build. My second axle would be a dummy, not live. It would also be a gas cart, so this does you no good. Sorry I can't help.

TheNewGuy is offline   Reply With Quote
Unread 02-29-2016, 10:40 PM   #3
Gone Wild
E-Z-GO
 
Join Date: Oct 2013
Posts: 297
Default Re: Tandem axle build

Just when I though no one else had this idea, here it is. Good luck with it. I'll be following along.
tculpepper is offline   Reply With Quote
Unread 03-08-2016, 07:56 AM   #4
Totally Wild
 
rifter's Avatar
Harley Davidson
 
Join Date: Nov 2007
Location: Orlando Florida
Posts: 3,945
Default Re: Tandem axle build

I've thought of this too, I was thinking about a chain adapter behind the driven clutch going to the back tandem with the same sized (tooth) sprocket, coilovers on both axles, 4 link the front axle with a panhard bar, link bars from the front axle to the back and say the top 2 bars of a 4 link going to the top of the rear axle with a diagonal bar from the front to the rear axle to keep the rear axle in line with the front. It would be alot of work but what the heck building is what it's about.
rifter is offline   Reply With Quote
Unread 03-08-2016, 10:13 AM   #5
Feral
 
Unforgiven's Avatar
Mixed Breed
 
Join Date: Feb 2011
Location: Central Miss
Posts: 1,882
Default Re: Tandem axle build

Have you ever experienced De ja vu?

Did You just say that?

Attached: a little brain storming of the Cushman before I sold it.
Attached Images
File Type: jpg deuce.jpg (285.0 KB, 0 views)
Unforgiven is offline   Reply With Quote
Reply

Tags
4x6
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center


Thread Tools
Display Modes


Similar Threads
Thread Forum
axle talk.live axle what one Bike & ATV Engine Swaps
4" axle drop for EZGO TXT, did I get the right axle? Lifted Golf Carts
Mini Truck samurai axle build Side x Sides-ATV-Quads-Bikes-Jeeps-4x4's!
stock axle vs. factory lift axle Gas EZGO
tandem dump trailer plans Design Center


All times are GMT -5. The time now is 05:00 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.