|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
08-20-2007, 10:54 PM | #1 |
Not Yet Wild
Join Date: Aug 2007
Posts: 25
|
lowering an ez go?
whats an cheap easy way to lowering an 87 ez-go, about 2 in'. i've seen some where if you go 3 you'll scrub.the back looks easyjust remove spings and cut off 1or 2 circles out of the spring. but on the front the shock run threw the spring, and you got streeing crap in the way, any help would be great. pro's and con's? do's and dont's?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-21-2007, 07:45 AM | #2 |
Gone Wild
Join Date: Jan 2007
Posts: 731
|
Re: lowering an ez go?
I wouldnt cut springs but thats just me. the front should have leafsprings and you just need to relocate the mounts.
|
08-21-2007, 09:26 AM | #3 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: lowering an ez go?
Could you do something like a reverse lift kit? Basic lift kits for the E-Z-GOs just add a block between the top of the axle and the bottom of the leaf spring. Could you add a 2" block between the bottom of the axle and the top of the leaf spring? It would have the springs down in the "line of fire" to get snagged on everything, but it would lower it. Then again, if you're lowering it, you probably have no intentions of taking it off road.
|
08-21-2007, 01:56 PM | #4 |
Gone Wild
Join Date: Jan 2007
Posts: 731
|
Re: lowering an ez go?
yes, but just remember on the older ones relocating the spring plates to the bottom will give you some drop without blocks.
|
08-21-2007, 08:31 PM | #5 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: lowering an ez go?
Heating the springs up red hot should set it down a couple inches.
|
08-21-2007, 08:47 PM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: lowering an ez go?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-21-2007, 10:07 PM | #7 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: lowering an ez go?
|
08-21-2007, 10:17 PM | #8 |
Gone Wild
Join Date: Jan 2007
Posts: 731
|
Re: lowering an ez go?
Relocate the springs under the axle and see if thats enough.
|
08-22-2007, 04:53 AM | #9 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: lowering an ez go?
I've heard that if you heat up springs after time it will start dropping losing its spring!!! Well thats what I heard not too sure Might be better to cut them
|
08-22-2007, 07:46 AM | #10 |
Not Yet Wild
Join Date: Aug 2007
Posts: 25
|
Re: lowering an ez go?
what about spring compsser clamps, that way if i dont like the ride ican go back to normal. not sure where to find them. cant find online. i remeber about 10 years ago when lowering was a fad they sold these clamps in autostore, but cant find now
|