I made a _____ for my cart!

SpoiledRotten · 12-29-2010, 08:10 AM

What did you "build" for your cart; any make/model cart? If you fabbed it, show it off! This is an opportunity to strut your fabbing skills, metal skills, welding skills, design skills, and also a good way to get lots of ideas for our carts. It may have been something as simple as a cup holder. If it's unusual then all the better.

I'll start with the hitch that I've already posted. If someone wants some ideas on how to "build" a hitch or a roof rack or anything else for their cart, they can more than likely find it here. It's okay if you have a "build" thread going for your cart, if you have made something specific, post here too. Don't use this for a build thread, just for specific items that would probably get someone's attention.

on_the_fly · 12-29-2010, 10:45 AM

well i just made a brush guard for my cc a few days ago and back in the summer i made a rear box for it. i also made the reciver out of a 1/2 inch plate of aluminum ( plenty strong enough i pull my 16' bass boat in and out of the garage with it), i also striped it down and shot it from the factory cream color to the burgandy it is now. now im looking into 8" lift with some 23's on a 10" rim i think

scottyb · 12-29-2010, 11:15 AM

I like the looks of that box ~ because it looks almost exactly like the one I built for my 'battery cart'
NICE work there, on_the_fly

I did a cool install of a battery meter in my Ezgo

blake80 · 12-29-2010, 11:20 AM

Im building a roll cage for mine that can be seen on thread big bad roll cage. But, here is my foot platform that i started on.

SpoiledRotten · 12-29-2010, 11:58 AM

Very nice looking bed, on_the_fly. That's some good metal work.
Scotty, I love the looks of that meter in the dash. That is super clean. I'm still wanting to put one in mine.

scottyb · 12-29-2010, 12:15 PM

Quote:

Originally Posted by SpoiledRotten

Very nice looking bed, on_the_fly. That's some good metal work.
Scotty, I love the looks of that meter in the dash. That is super clean. I'm still wanting to put one in mine.

It is clean with a new decal

Kessler · 12-29-2010, 01:03 PM

Nice work gents!
Not much "skill" involved, but I made a booster seat for my vertically challenged warden while trying to keep it a somewhat factory look.

SpoiledRotten · 12-29-2010, 01:08 PM

Very good idea, Kessler! That's what I'm talking about. Someone will see that and realize that they could use something similar.

scottyb · 12-29-2010, 01:53 PM

I made an electric dump box for my wife's 1989 CC DS and converted it to 48v from resistor coils ... it was a workhorse box so I had to shorten it 7 inches.

TerryH · 12-29-2010, 07:26 PM

I made a lot of phone calls and bought a bunch of stuff that other people made.

12-29-2010, 08:10 AM	#1
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	I made a _____ for my cart! What did you "build" for your cart; any make/model cart? If you fabbed it, show it off! This is an opportunity to strut your fabbing skills, metal skills, welding skills, design skills, and also a good way to get lots of ideas for our carts. It may have been something as simple as a cup holder. If it's unusual then all the better. I'll start with the hitch that I've already posted. If someone wants some ideas on how to "build" a hitch or a roof rack or anything else for their cart, they can more than likely find it here. It's okay if you have a "build" thread going for your cart, if you have made something specific, post here too. Don't use this for a build thread, just for specific items that would probably get someone's attention.

12-29-2010, 11:58 AM	#5
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	Re: I made a _____ for my cart! Very nice looking bed, on_the_fly. That's some good metal work. Scotty, I love the looks of that meter in the dash. That is super clean. I'm still wanting to put one in mine.

12-29-2010, 01:08 PM	#8
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	Re: I made a _____ for my cart! Very good idea, Kessler! That's what I'm talking about. Someone will see that and realize that they could use something similar.

12-29-2010, 07:26 PM	#10
TerryH Let's go racin' boyz!! Join Date: Oct 2010 Location: Springdale, AR Posts: 4,156	Re: I made a _____ for my cart! I made a lot of phone calls and bought a bunch of stuff that other people made.

Similar Threads
Thread	Forum
has any one cut a pds and made alimo out of it	Design Center
Can you guess who made this cart ? See Pic..	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum