|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
12-29-2010, 08:10 AM | #1 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
I made a _____ for my cart!
What did you "build" for your cart; any make/model cart? If you fabbed it, show it off! This is an opportunity to strut your fabbing skills, metal skills, welding skills, design skills, and also a good way to get lots of ideas for our carts. It may have been something as simple as a cup holder. If it's unusual then all the better.
I'll start with the hitch that I've already posted. If someone wants some ideas on how to "build" a hitch or a roof rack or anything else for their cart, they can more than likely find it here. It's okay if you have a "build" thread going for your cart, if you have made something specific, post here too. Don't use this for a build thread, just for specific items that would probably get someone's attention. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-29-2010, 10:45 AM | #2 |
Gone Wild
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
|
Re: I made a _____ for my cart!
well i just made a brush guard for my cc a few days ago and back in the summer i made a rear box for it. i also made the reciver out of a 1/2 inch plate of aluminum ( plenty strong enough i pull my 16' bass boat in and out of the garage with it), i also striped it down and shot it from the factory cream color to the burgandy it is now. now im looking into 8" lift with some 23's on a 10" rim i think
|
12-29-2010, 11:15 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I made a _____ for my cart!
I like the looks of that box ~ because it looks almost exactly like the one I built for my 'battery cart'
NICE work there, on_the_fly I did a cool install of a battery meter in my Ezgo |
12-29-2010, 11:20 AM | #4 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: I made a _____ for my cart!
Im building a roll cage for mine that can be seen on thread big bad roll cage. But, here is my foot platform that i started on.
|
12-29-2010, 11:58 AM | #5 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: I made a _____ for my cart!
Very nice looking bed, on_the_fly. That's some good metal work.
Scotty, I love the looks of that meter in the dash. That is super clean. I'm still wanting to put one in mine. |
12-29-2010, 12:15 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I made a _____ for my cart!
|
12-29-2010, 01:03 PM | #7 |
Not Yet Wild
Join Date: Sep 2010
Location: Prince George Va.
Posts: 66
|
Re: I made a _____ for my cart!
Nice work gents!
Not much "skill" involved, but I made a booster seat for my vertically challenged warden while trying to keep it a somewhat factory look. |
12-29-2010, 01:08 PM | #8 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: I made a _____ for my cart!
Very good idea, Kessler! That's what I'm talking about. Someone will see that and realize that they could use something similar.
|
12-29-2010, 01:53 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I made a _____ for my cart!
I made an electric dump box for my wife's 1989 CC DS and converted it to 48v from resistor coils ... it was a workhorse box so I had to shorten it 7 inches.
|
12-29-2010, 07:26 PM | #10 |
Let's go racin' boyz!!
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,156
|
Re: I made a _____ for my cart!
I made a lot of phone calls and bought a bunch of stuff that other people made.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
has any one cut a pds and made alimo out of it | Design Center | |||
Can you guess who made this cart ? See Pic.. | Lifted Golf Carts |