Light Kit G-9 HELP!!!

chazdo2

I cant figure out what the instructions mean when they say " line up the top of the template with the bottom of the radius and tape in place". Then step 2 measure 8-1/4 inches from " M " to inside of cut out on right.
What the **%# is the radius and where the hell is " M " Help you smart guys!!!! I dont want to mess things up the cart looks pretty good..........for a while till the kids get to it!

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Dlcain

hahaha.... I'm laughing because I went thru the same crap that your going thru! It took me a few beers sitting in front of the cart before I started looking at the letters in my "YAMAHA" emblem right smack in the middle of the cowl. The directions don't tell you if the dimmension is taken from the edge or the middle of the letter either! As far as the top part of the template, if I remember right, there's a dark straight line about 3" long that your supposed to line up at the bottom of your cowl radius at the tangent. Dave

chazdo2

Thanks but guess what my buddy who painted it removed the YAMAHA emblem. Figures

Dlcain

If your not in a hurry I can get you a dimmension from the edge of the dash to the edge of the cutout (which is more accurate) plus a few pic's possibly. It's a little harder on the G9's due to the fact you have to cut into the tray area. one of the clips that hold the tray in has to be removed as well.

chazdo2

Thanks a ton, any and all help is appreciated! Pics would be GREAT!!!!!!!!!!!