![]() |
|
Design Center Shop tools, fabrication and Paint and Body |
![]() ![]() |
Thread Tools | Display Modes |
![]() | #1 |
Card Carrying Old Fart ![]() ![]() Join Date: Feb 2012 Location: Kentucky
Posts: 668
| ![]() I have an '07 EZGO TXT with the short roof and rear flip seat. Most of the enclosures I have seen for 4 passenger are for the long roof. Has anyone built a frame extension that will hold up the 4 passenger enclosure and not puddle rain in the top? |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #2 |
Gone Wild ![]() Join Date: Sep 2011 Location: Tampa, Fl.
Posts: 189
| ![]() I built one out of pvc tubing, worked beautifully, will try to find the pics and post tonight ![]() |
![]() | ![]() |
![]() | #3 |
Card Carrying Old Fart ![]() ![]() Join Date: Feb 2012 Location: Kentucky
Posts: 668
| ![]() |
![]() | ![]() |
![]() | #4 |
Gone Wild ![]() Join Date: Sep 2011 Location: Tampa, Fl.
Posts: 189
| ![]() see if this works |
![]() | ![]() |
![]() | #5 |
Card Carrying Old Fart ![]() ![]() Join Date: Feb 2012 Location: Kentucky
Posts: 668
| ![]() |
![]() | ![]() |
![]() | #6 |
Gone Wild ![]() Join Date: Sep 2011 Location: Tampa, Fl.
Posts: 189
| ![]() didn't have the cart very long, but never heard anything from the buyer, and you can always put a T in the middle and run another piece of pvc from front to back or side to side ![]() |
![]() | ![]() |
![]() | #7 |
Not Yet Wild Join Date: Oct 2014
Posts: 1
| ![]() Thanks for the pictures just added a enclosure to my cart and thought i was going to have to spend 300 for a new roof. thanks again for the time and effort. ![]() |
![]() | ![]() |
![]() | #8 |
Card Carrying Old Fart ![]() ![]() Join Date: Feb 2012 Location: Kentucky
Posts: 668
| ![]() Based on Mtwain's picture I built a frame using PVC pipe to accommodate a Classic Accessories 4 passenger enclosure. I had to do some heat bending of the pipes in the uprights but it turned out very nice. I didn't want to drill into the roof plastic so I made some "Z" shaped brackets from some flat aluminum stock and mounted them to the existing roof support bolts. I will be bringing the cart home from the lake soon and will post some pics after removing the enclosure. |
![]() | ![]() |
![]() | #9 |
Gone Wild ![]() Join Date: Aug 2012 Location: Southern Indiana
Posts: 202
| ![]() Looks Great!!! I will have to try this! |
![]() | ![]() |
![]() | #10 |
Not Yet Wild Join Date: Sep 2015
Posts: 1
| ![]() Just installed a Classic 4 person cover on our Club Car 2 + 2 flip back seat cart. I really do not wish to drill into short top. I have seen the very nice photos already posted. Any other designs/photos? |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
Question about extension cord | Electric EZGO | |||
Charger Cord Extension? | Electric Club Car | |||
Charger extension cord? | Electric Yamaha |