Motor Help

Lunkerlure · 07-18-2008, 08:30 PM

I have a motor out of a late 80's model electric ez go. How do I straight wire it to make sure it works? I want to attach the motor to the lower unit of a boat motor. I have all the switches, solenoid, wiper, variable speed coils, and shifter switch. I want to use only the motor, wiper, variable speed and ignition switch for my project. The motor I have has 4 post, 2 of them are spaced pretty far apart at the end of the motor near the shaft with the brakes. The other 2 are closer together a little farther from the motor end and are aligned the same direction not running from end to end. Please help so I can get my boat running. Thank you in advance.

07-18-2008, 08:30 PM	#1
Lunkerlure Not Yet Wild Join Date: Jul 2008 Posts: 18	Motor Help I have a motor out of a late 80's model electric ez go. How do I straight wire it to make sure it works? I want to attach the motor to the lower unit of a boat motor. I have all the switches, solenoid, wiper, variable speed coils, and shifter switch. I want to use only the motor, wiper, variable speed and ignition switch for my project. The motor I have has 4 post, 2 of them are spaced pretty far apart at the end of the motor near the shaft with the brakes. The other 2 are closer together a little farther from the motor end and are aligned the same direction not running from end to end. Please help so I can get my boat running. Thank you in advance.
Lunkerlure Not Yet Wild Join Date: Jul 2008 Posts: 18

Similar Threads
Thread	Forum
Replacing original motor with a GE motor???	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum