|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
03-23-2013, 11:30 AM | #1 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Special wheels needed
Anyone know of where I can get 10"/12"/13" maybe 14" , 3 1/2" wide wheels (and tires) that look like Centerlines with the standard 4 on 4 bolt pattern? Thanks for any leads, Dave
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-23-2013, 11:53 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: NE Oklahoma
Posts: 539
|
Have you checked any mini cooper forums? Or try early chevy corvair sources. I had a 64' corvair and I ran 17x7" wheels on it that were dual bolt pattern metric but measured 4 on 4" SAE. OEM wheels on the corvair were 13x5". Also didn't the fox body mustangs run a 4 bolt pattern that measured 4 on 4" or were they 4x4.14" like a lot of import cars...i.e. honda, Nissan? Maybe any of these could be a good lead into finding the Centerlines. Also, did Weld Racing make those wheels? Anyway, hopefully you'll have good luck finding them.
|
03-23-2013, 12:38 PM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Special wheels needed
|
03-23-2013, 12:52 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Special wheels needed
The Vega and Monza were 4"x4 as well.I think the Pinto may have been.Check Ebay,there are probably some old drag-fronts there.
|
03-23-2013, 05:46 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: NE Oklahoma
Posts: 539
|
Ahh brain fart! Cenerline was or is a company in itself. No correlation with Weld Racing. I think I got it right:rolleyes:.
|
03-23-2013, 05:47 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: NE Oklahoma
Posts: 539
|
Gotta love those funny cars and dragsters from the 70's! I have a cousin named Mike Burkhart that drag raced all throughout the 50-80's. Called him Big Mike!
|
03-24-2013, 11:42 AM | #7 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: Special wheels needed
I think Centerline will make anything you want if possible, I had a couple of 3 1/2 X 15 4 lug convo pro's made a few years ago. I'm thinking around 150 a piece, I would just call and ask they are not like Weld they will sell to the public.
|
03-24-2013, 11:52 AM | #8 |
Gone Wild
Join Date: Dec 2009
Location: NE Oklahoma
Posts: 539
|
Yeah I would ask the company. Like Lurch said. Also I ran into this problem with a past project (94' Impala) that I was running Eagle Alloys series 212 size 20x9.5" and I had hit a curb and ruined a rim...the wheel was discontinued but they were nice enough to re-tool another rim for a replacement...and for standard cost of an in-stock wheel.
|
03-24-2013, 12:13 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Special wheels needed
Thanks guy's I had a set on my old V-8 Vega, but seems a web search has come up no go. Seems the aluminum scrap industry has taken the old wheels Don't think 15's will work, but could do some measureing.
|
03-24-2013, 01:09 PM | #10 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: Special wheels needed
I think they will make 14's.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wheel Spacers or Offset Wheels Needed? | Lifted Golf Carts | |||
wheels needed 10" | Golf Carts and Parts |