lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-23-2014, 08:31 PM   #1
OKIECLUBCAR
Not Yet Wild
 
Join Date: Oct 2014
Posts: 2
Default Harness Help

I am a new owner of a 2010 Precedent Electric. I ordered a light kit for 2008.5 + and a 48V to 12V voltage reducer. I assumed with the videos and instructions I could figure it out. I opened up the dash and the factory harness is 9 pin and a little grey plug with an orange cap. However, everything that came with my voltage reducer and light kit all are 12 pins. Any suggestions for this newbie?
OKIECLUBCAR is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-23-2014, 08:52 PM   #2
crash test dummy
Guest
 
Posts: n/a
Default Re: Harness Help

to BGW


what is the name of the light kit ? .. also reducer photo will help
  Reply With Quote
Old 10-23-2014, 09:03 PM   #3
OKIECLUBCAR
Not Yet Wild
 
Join Date: Oct 2014
Posts: 2
Default Re: Harness Help

Description is below. Don't see a brand name though. I bought it from Golf Cart Parts & Accessories.
Club Car Precedent Headlight & Tail-light Kit
HEADLIGHTS , TAIL LIGHTS, WIRING HARNESS, PUSH/PULL SWITCH, HARDWARE

INCLUDES THE REQUIRED BUCKET WIRING HARNESS

FITS PRECEDENT MODELS (2008-CURRENT)
ELECTRIC CARTS ONLY

DIRECTIONS & HARDWARE ARE INCLUDED

*Voltage reducer is recommended on electric carts but not required*




*Please be sure to make the correct battery wire connections as we will not accept returns due to improper wiring during installation*

Incorrect wiring may cause excessive voltage resulting in blown bulbs
OKIECLUBCAR is offline   Reply With Quote
Old 10-23-2014, 09:45 PM   #4
crash test dummy
Guest
 
Posts: n/a
Default Re: Harness Help

you need the lgt 396 sub harness for 08 +
9 pin to 12 pin

This is the bucket wire harness that is required for Club Car Precedent Golf cart models that were manufactured in 2008.5 and up. Made to fit our our LGT-306E precedent model light kits.
http://www.diygolfcart.com/Club-Car-...shoppingengine


see pdf file

Last edited by crash test dummy; 10-23-2014 at 09:52 PM.. Reason: added pdf file
  Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
What is this harness for? Electric Club Car
Need plug to fit harness Electric Club Car
PDS Harness Electric EZGO
WTB: Ez Go PDS Run/Tow Harness Golf Carts and Parts
Need a Wiring Harness for a G9 Gas Yamaha


All times are GMT -5. The time now is 02:36 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.