Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Electric Club Car (http://www.buggiesgonewild.com/electric-club-car/)
-   -   Throttle Input Question (http://www.buggiesgonewild.com/electric-club-car/100312-throttle-input-question.html)

CCFanatic 10-31-2014 07:20 PM

Throttle Input Question
 
Since my 95 DS was built when CC still had the 0-5k throttle, how easy would it be to make a 5k-0 controller work in this cart?

sunoco 10-31-2014 08:00 PM

Re: Throttle Input Question
 
You would need to change the throttle and controller. You could put in a vglide or mcor

CCFanatic 10-31-2014 08:07 PM

Re: Throttle Input Question
 
I currently have the older 0-5k VGlide in there

Sergio 10-31-2014 08:35 PM

Re: Throttle Input Question
 
You just have to move the wire from the 3rd post to the 9th post and it should reverse the range.

CCFanatic 05-29-2015 04:49 PM

Re: Throttle Input Question
 
Digging up an old thread. Now trying to do the opposite. Got a 0-5K controller. How can I make a 5k-0 Regen 2 V-Glide work with that?

Sergio 05-29-2015 05:12 PM

Re: Throttle Input Question
 
This may help with re-wiring the VGlide from 2-wire 0-5kΩ to a 3-wire 5kΩ-0.

http://www.buggiesgonewild.com/elect...ml#post1062722

CCFanatic 05-29-2015 05:15 PM

Re: Throttle Input Question
 
Quote:

Originally Posted by Sergio (Post 1160320)
This may help with re-wiring the VGlide from 2-wire 0-5kΩ to a 3-wire 5kΩ-0.

http://www.buggiesgonewild.com/elect...ml#post1062722

I want to make a 3-wire 5k-0 V-Glide to a 2-wire 0-5k V-Glide

Sergio 05-29-2015 05:25 PM

Re: Throttle Input Question
 
Just use the wires from post #1 and #3, tape off #9 as it will not be needed.

It does not matter which way you connect those two wires (post #1 and #3).

CCFanatic 05-29-2015 05:26 PM

Re: Throttle Input Question
 
Quote:

Originally Posted by Sergio (Post 1160329)
Just use the wires from post #1 and #3, tape off #9 as it will not be needed.

It does not matter which way you connect those two wires (post #1 and #3).

OK, so the order of the resistors on the back doesn't matter?

Sergio 05-29-2015 05:39 PM

Re: Throttle Input Question
 
They should increase in the same speed step increments since the 3 wire setup is really a 0-5v.

In other words, they are in the same sequence you need and it should provide a similar throttle experience.


All times are GMT -5. The time now is 09:08 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.