will 2011 "PH" controller work on 2007 "PQ"?

smokey tennis shoe · 12-12-2014, 08:17 PM

I just smoked a controller on a 2007 precedent, "PQ" cart. It is a curtis
1510A-5250

My question, is this :

I have access to a 2011 "PH" cart, completly stock. Will this 2011 cart have the same controller in it, so i can rob from the 2011 and install in the 07 "PQ"??

CCFanatic · 12-12-2014, 08:20 PM

Nope, the IQ and Excel controllers are different

jakesnake27 · 12-12-2014, 08:53 PM

smokey tennis shoe · 12-12-2014, 09:41 PM

ok, thank you for that info. I guess i will send the controller off to be rebuilt.

Thanks guys!

Golfdog · 12-13-2014, 04:22 AM

Quote:

Originally Posted by smokey tennis shoe

I just smoked a controller on a 2007 precedent, "PQ" cart. It is a curtis
1510A-5250

My question, is this :

I have access to a 2011 "PH" cart, completly stock. Will this 2011 cart have the same controller in it, so i can rob from the 2011 and install in the 07 "PQ"??

There was some input from David (TahoeDawgZ71) back in Dec.2011 and if you google - Successfully installed Excel controller in IQ cart- you will see his answer to a similar question. Basically it can be done.

CCFanatic · 12-13-2014, 08:43 AM

Well, yes, it can be done. But, it is not a direct bolt in, you would have to do a few modifications

CCFanatic · 12-13-2014, 02:05 PM

Check out this write up by David -
Successfully installed Excel controller on IQ Car

TahoeDawgZ71 · 12-13-2014, 02:10 PM

I do it all the time now. We get used controllers by the truck load from Club Car and use them often. We're now unable to get used IQ controllers so we do lots of conversions. It's very simple and it works beautifully.

greg-g · 12-13-2014, 02:26 PM

Quote:

Originally Posted by TahoeDawgZ71

I do it all the time now. We get used controllers by the truck load from Club Car and use them often. We're now unable to get used IQ controllers so we do lots of conversions. It's very simple and it works beautifully.

Could you do a write up on converting excel to IQ with part numbers

TahoeDawgZ71 · 12-13-2014, 02:31 PM

Quote:

Originally Posted by greg-g

Could you do a write up on converting excel to IQ with part numbers

103374901 - IQ Wire Harness

The harness is easy to install. Remove dash, floormat, and rear body. Lift it out and replace it with the new one. You're done

12-12-2014, 08:17 PM	#1
smokey tennis shoe Gone Wild Join Date: Feb 2012 Location: Indio, CA The Desert! Posts: 1,263	will 2011 "PH" controller work on 2007 "PQ"? I just smoked a controller on a 2007 precedent, "PQ" cart. It is a curtis 1510A-5250 My question, is this : I have access to a 2011 "PH" cart, completly stock. Will this 2011 cart have the same controller in it, so i can rob from the 2011 and install in the 07 "PQ"??

12-12-2014, 08:20 PM	#2
CCFanatic DS Drivers Club Founder Join Date: Jul 2013 Location: Upstate NY Posts: 3,428	Re: will 2011 "PH" controller work on 2007 "PQ"? Nope, the IQ and Excel controllers are different

12-12-2014, 08:53 PM	#3
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: will 2011 "PH" controller work on 2007 "PQ"?
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

12-12-2014, 09:41 PM	#4
smokey tennis shoe Gone Wild Join Date: Feb 2012 Location: Indio, CA The Desert! Posts: 1,263	Re: will 2011 "PH" controller work on 2007 "PQ"? ok, thank you for that info. I guess i will send the controller off to be rebuilt. Thanks guys!

12-13-2014, 08:43 AM	#6
CCFanatic DS Drivers Club Founder Join Date: Jul 2013 Location: Upstate NY Posts: 3,428	Re: will 2011 "PH" controller work on 2007 "PQ"? Well, yes, it can be done. But, it is not a direct bolt in, you would have to do a few modifications

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-13-2014, 02:05 PM	#7
CCFanatic DS Drivers Club Founder Join Date: Jul 2013 Location: Upstate NY Posts: 3,428	Re: will 2011 "PH" controller work on 2007 "PQ"? Check out this write up by David - Successfully installed Excel controller on IQ Car

12-13-2014, 02:10 PM	#8
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: will 2011 "PH" controller work on 2007 "PQ"? I do it all the time now. We get used controllers by the truck load from Club Car and use them often. We're now unable to get used IQ controllers so we do lots of conversions. It's very simple and it works beautifully.

Similar Threads
Thread	Forum
Club Car belt/clutch won't "change", as stuck in "low" gear	Gas Club Car
Why "Carbon Fiber" "Wood grain" and Diamond Plated?	Gas EZGO
Purchase of 2011 "the drive" ptv cart	Electric Yamaha
Just bought a 2011 EZGO RXV all "murdered out"	Electric EZGO
2011 RXV Gas - 3" or 6" and rear seat ???	Lifted Golf Carts