|11-14-2008, 12:23 PM||#1|
Join Date: Sep 2008
I am having some trouble wiring my 48v to 12v converter. In the instructions it tells me to wire it directly to the batteries, but i don't want that becuase that means it will always be on. So i wired it through the ignition switch all works fine when it is in neutral and reverse but when i put it in forward the lights go out. Any sugestions??
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|11-15-2008, 08:33 AM||#2|
just leave me alone
Join Date: Aug 2008
Re: 48v converter
Have you checked the DC voltage at the switch Without the convertor in place,
then With the convertoer in Place
Does the cart still run when the lights go out ?
What year and Model is the Cart ?
If all else fails connect it across the Batteries as recommended and see if you get the same results, could be defective from the Manufacturer.
|voltage converter||Electric Club Car|
|16 to 12 volt converter problems||Electric Club Car|
|converter exploded||Electric Club Car|
|Converter Question||Electric Club Car|
|Converter installation||Electric Club Car|