lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-19-2015, 09:29 PM   #1
Gone Wild
 
theboss20's Avatar
Harley Davidson
 
Join Date: Jun 2014
Location: Buckeye, Az
Posts: 646
Thumbs up 97 cc ds

Replacing the floor mat in this cart but I was surprised that the holes in the floor mat were too small for the pedals ( brake and gas ) to go through. Taking the pedal off is an option but looks like a challenge...the next choice is to slice the mat to allow the pedals to slide through the enlarged holes. Look for somebody's experience to help this install. Thanks for any help.
theboss20 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-19-2015, 09:36 PM   #2
DS Drivers Club Founder
 
CCFanatic's Avatar
Club Car
 
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,409
Default Re: 97 cc ds

Take the accelerator pedal off and pull the mat and rotate it so it fits over the brake pedal. The mat will come right off
CCFanatic is online now   Reply With Quote
Unread 01-20-2015, 01:49 PM   #3
Gone Wild
 
theboss20's Avatar
Harley Davidson
 
Join Date: Jun 2014
Location: Buckeye, Az
Posts: 646
Default Re: 97 cc ds

I am installing and the precut holes are far smaller than then the size of the pedals...removing the pedal appears difficult...any input?
theboss20 is offline   Reply With Quote
Unread 01-20-2015, 02:57 PM   #4
DS Drivers Club Founder
 
CCFanatic's Avatar
Club Car
 
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,409
Default Re: 97 cc ds

Here is the blowup of the pedal assy.
Pedal.JPG

IIRC, when I pulled the pedal on my 90, it wasn't that difficult
CCFanatic is online now   Reply With Quote
Unread 01-20-2015, 07:19 PM   #5
Gone Wild
Club Car
 
Join Date: Sep 2012
Location: Alberta - Canada
Posts: 998
Default Re: 97 cc ds

Remove accel pedal like they said. BUT - its pretty cold out these days. I used a paint stripper gun to heat the back of the mat where the cut-outs are to a temperature where the mat became more pliable. But be careful - a paint stripper gun can heat things to the melting point pretty quickly. A cold mat is like trying to stretch a mud flap!
joesam is offline   Reply With Quote
Reply

Tags
floor mat
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 06:47 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.