FSIP 500a Adjustment

Gwagon

Just curious, what others that have the FSIP 500a controller set the best torque/speed combo?



thanks


Gwagon

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Swan

the only adjusts are the plugs on the side CL (Connection end ), CA (Middle), PLU ( Far End )
The CA is the only one I have messed with , the other I have left at factory settings

Potentiometer Adjustment.
The potentiometers are designed to be adjusted with a small trimmer or screwdriver.

Current Limit (CL) – Adjust potentiometer CW (clockwise) to increase maximum current limit. The current is adjustable from
approximately 50% to 100% of controller rating.

Controlled Acceleration (CA) – Adjust potentiometer CW to increase acceleration. The acceleration ramp is adjustable from
approximately 0.5 to 5 seconds. The factory setting is 1.2 seconds.

Plugging Adjustment (PL) – Adjust potentiometer CW to increase intensity of plugging. Be sure when setting Plugging to make for
smooth forward to reverse transition. Plugging current is adjustable from approximately 10% to 100% of specified limit.

scottyb

I suggest you try it at the factory settings BEFORE adjusting.
95% of users are happy using it on the factory settings.

Captaintv

What are yall using to adjust GE 500 amp controller? I have a very small flathead screw driver and can't adjaut anything ? Thanks.

scottyb

It takes a eyeglasses size common screwdriver to adjust. But there is nothing to gain unless you wish to spin the tires on take off, then you can up the acceleration rate but, amps already 100% from factory

Attached Images

FSIP adjustments.JPG (85.0 KB, 0 views)

Captaintv

Ok awesome! Thanks. I purchased package 404b a few weeks ago. Only took about 1.5 hours to install. Just wanted to try different setup! Very impressed thanks!