lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-16-2015, 01:56 PM   #31
Gone Wild
 
PAPABEAR1's Avatar
Mixed Breed
 
Join Date: Nov 2013
Location: Aylett, Va. on the Mattaponi.
Posts: 1,530
Default Re: Ready for snow

Last year I took some 3/8 nylon rope and just put it thru the holes in the rim and then tied it together , wala snow chains sort of. worked great . and the rope didn't scratch my bling.
PAPABEAR1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-16-2015, 02:04 PM   #32
Gone Wild
 
Great white north's Avatar
E-Z-GO
 
Join Date: Nov 2012
Location: Ontario , Canada
Posts: 608
Default Re: Ready for snow

Farm buggy ... You get approx. 1/3 more torque upping a stock controller with a Alltrax 400 amp unit
I would agree with SC give silver wolf a call ... Excellent company quality parts
Great white north is offline   Reply With Quote
Unread 02-17-2015, 01:37 AM   #33
Getting Wild
 
Farm Buggie's Avatar
Club Car
 
Join Date: Jun 2013
Location: Troy, Missouri
Posts: 84
Default Re: Ready for snow

Thanks great white north! I do appreciate the advise!!! obviously I can weld and fab a little bit but, wasn't sure where to start on improving the performance. I use the cart at the farm where I deer and turkey hunt so, some extra torque would help out there as well. I did upgrade the cables to 2 ga. already. Also I have a new set of swamp fox tires (23x10-12)sitting in the garage. Maybe they will get better traction than the tires that are on there now. I wasn't planning on putting the new tires on till spring. only bought them because they look so Bad A$$
Farm Buggie is offline   Reply With Quote
Unread 02-17-2015, 11:43 PM   #34
Not Yet Wild
 
arejaye's Avatar
E-Z-GO
 
Join Date: Feb 2015
Location: Paddock Lake, Wi
Posts: 20
Default

Did you fab the mounting part of the plow yourself? If so, and pics? I have a 88 EZGO and they don't make mounting kits for under 1995.


1988 EZGO Gasser
arejaye is offline   Reply With Quote
Unread 02-18-2015, 01:21 AM   #35
Getting Wild
 
Farm Buggie's Avatar
Club Car
 
Join Date: Jun 2013
Location: Troy, Missouri
Posts: 84
Default Re: Ready for snow

arejaye I did fab the mounting plate. I'm really bad for not taking pics during builds. I'll try to take some close-ups of it and post them. I'll tell you that I used 3/16" plate and welded a piece of pipe 12" long with an ID of a little over 3/4" to the bottom of it. bolted it between my bumper and frame. Then made a bracket and welded to the plow arms. The bracket has holes drilled at each end and fits over the pipe. I slid a piece of 3/4" bar stock through the bracket and pipe with washers and clips on each end. hope that helps for now.
Farm Buggie is offline   Reply With Quote
Unread 02-19-2015, 12:58 PM   #36
Getting Wild
 
Farm Buggie's Avatar
Club Car
 
Join Date: Jun 2013
Location: Troy, Missouri
Posts: 84
Default Re: Ready for snow

arejaye, here are some pics of the mount.
Attached Images
File Type: jpg 1.jpg (208.9 KB, 0 views)
File Type: jpg 2.jpg (127.1 KB, 0 views)
File Type: jpg 3.jpg (175.9 KB, 0 views)
File Type: jpg 4.jpg (202.4 KB, 0 views)
File Type: jpg 5.jpg (194.6 KB, 0 views)
Farm Buggie is offline   Reply With Quote
Unread 03-10-2015, 02:19 PM   #37
Not Yet Wild
 
arejaye's Avatar
E-Z-GO
 
Join Date: Feb 2015
Location: Paddock Lake, Wi
Posts: 20
Default Re: Ready for snow

Quote:
Originally Posted by Farm Buggie View Post
arejaye, here are some pics of the mount.
Thank you for the explanation and photos! Appears to be fairly simple, yet rugged. I sense a summer/fall project ahead this year...hope to be plowing in style next winter! Thanks again, I may pop in for a question or two when I start the build.
arejaye is offline   Reply With Quote
Unread 03-10-2015, 03:05 PM   #38
Gone Wild
 
mymonstertruck's Avatar
Club Car
 
Join Date: Aug 2013
Location: Michigan
Posts: 508
Default Re: Ready for snow

Take a hockey puck place it in a C-clamp use a hack saw to cut it in half. Then place each puck smooth side down on the ground on each side of the blade about 3 inches inside the blade. Drill a hole in the center of each puck and bolt it to the blade. This is what I did with my blade for my cart. It made it a lot easier for the cart to push snow while only leaving 1/2" of snow left on the drive way.
mymonstertruck is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
My 84 G1 is ready for camp! Gas Yamaha
flamed out and and ready for the mud Lifted Golf Carts
88 E-z Go Almost Ready To Show Lifted Golf Carts


All times are GMT -5. The time now is 05:41 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.