|02-26-2015, 07:00 PM||#11|
Join Date: Oct 2012
Location: Eastern NC
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|02-26-2015, 07:13 PM||#12|
Join Date: Sep 2012
Location: Charlotte, NC
Re: What size ring connectors on F&R Switch?
I think 4ga is plenty for stock to medium upgrades.
The 2ga and larger will not do anything for your cart except for pulling heavy loads from a dead stop, which is the only time You will ever get current high enough to make a difference.
Also, make sure You use a stud when running the larger cables through the OBC (1 cable per each side of the OBC).
If You use 2ga or larger cables with a FNR switch, You may want to consider using a reversing contactor, as the 2ga cable will likely put stress on those tiny #10 screws holding the larger cables to the FNR.
You are more likely to have issues with bad crimp connections and high surface contact resistance than voltage drop difference between 4ga and a larger cable.
|G16 ring end gap size??||Gas Yamaha|
|What connectors should I use to replace on 90 Marathon||Electric EZGO|
|2 gauge connectors||Electric EZGO|
|connectors and wires question||Electric EZGO|
|Precedent Connectors||Electric Club Car|