|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-23-2015, 11:58 AM | #1 |
Getting Wild
Join Date: Oct 2012
Location: Eastern NC
Posts: 141
|
What size ring connectors on F&R Switch?
Gotta couple questionable connections and I'm gonna go ahead and replace the connectors but am unsure what size they are...I could just lop off the connector and a short piece of wire but am sure someone knows the size:)
The blue and red wires are what I'm looking at.. Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2015, 12:46 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: What size ring connectors on F&R Switch?
The smaller connectors are 1/4" diameter hole.
Batteries, controller, solenoid and Motor are 5/16" diameter hole. Some Heavy Duty Contactors are 3/8" diameter hole. |
02-23-2015, 12:50 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: What size ring connectors on F&R Switch?
oops
|
02-23-2015, 01:58 PM | #4 |
Getting Wild
Join Date: Oct 2012
Location: Eastern NC
Posts: 141
|
Thanks Sergio,
So 1/4 on the F&R but what gauge wire is it? Lol And what do ya mean by oops ScottyB? ..they do look a little ruff huh |
02-23-2015, 02:17 PM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: What size ring connectors on F&R Switch?
I think Scottyb and I posted at the same time...
Technically, there are 2 sizes in the F&R (I saw his post before he deleted it ) The swivel posts are held in place by: #10-24 X 1/2 screws, so they are #10 posts, but 1/4" works fine too. The other F&R wires are held in place by: 1/4-20 X 5/8" screws, so they are 1/4" size The factory cables are 6ga. |
02-23-2015, 02:19 PM | #6 |
Getting Wild
Join Date: Oct 2012
Location: Eastern NC
Posts: 141
|
Thanks a bunch!
|
02-23-2015, 02:30 PM | #7 |
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: What size ring connectors on F&R Switch?
wire gauge- stock 6 gauge
upgraded 4 or 2 gauge . |
02-23-2015, 03:31 PM | #8 |
Getting Wild
Join Date: Oct 2012
Location: Eastern NC
Posts: 141
|
Thanks guys, knew I cld count on y'all!
|
02-26-2015, 02:23 PM | #9 |
Gone Wild
Join Date: Dec 2012
Location: The Villages, FL
Posts: 552
|
Re: What size ring connectors on F&R Switch?
|
02-26-2015, 03:03 PM | #10 |
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: What size ring connectors on F&R Switch?
Until you upgrade ALL the power cables you wont see any real benefit. One small "hose" becomes a bottle-neck.
. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 ring end gap size?? | Gas Yamaha | |||
What connectors should I use to replace on 90 Marathon | Electric EZGO | |||
2 gauge connectors | Electric EZGO | |||
connectors and wires question | Electric EZGO | |||
Precedent Connectors | Electric Club Car |