02-28-2015, 12:28 AM | #1 |
Not Yet Wild
Join Date: Dec 2014
Posts: 42
|
break pedal
Can the break pedal on a club car president be adjusted. New to golf carts and when I push the break pedal to park it will not hold.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-28-2015, 10:40 AM | #2 |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: break pedal
Not sure what year you have but on an earlier precedent you would remove the mat and access panel where you would find a turnbuckle with locking nuts on both ends. The forward jam nut is a left hand thread. Once you loosen both jam nuts, move the turnbuckle to pull on the cables until there is about 2 inches of clearance on the equalizer where the cables are attached to the top of the opening where it is located. Test your brake pedal from there to see if it works the way it should.
|
02-28-2015, 02:24 PM | #3 |
Not Yet Wild
Join Date: Dec 2014
Posts: 42
|
Re: break pedal
my president is a 2011
|
02-28-2015, 03:28 PM | #4 |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: break pedal
I believe it should be basically the same for an 11 Precedent.
Pull up the mat and look under the inspection cover. |
02-28-2015, 03:46 PM | #5 |
Not Yet Wild
Join Date: Dec 2014
Posts: 42
|
Re: break pedal
OK, I adjusted the linkage and now it holds, thanks
|
02-28-2015, 03:52 PM | #6 |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: break pedal
Great
|
|
|
Similar Threads | ||||
Thread | Forum | |||
just break down and buy it ! | Gas Yamaha | |||
1987 club car electric smooth pedal then jerky pedal | Electric Club Car | |||
did i break something | Gas EZGO | |||
break in oil | Clone Engine Swaps | |||
Brake Pedal Break Down | Electric EZGO |