which lift kit & confirm CC Precedent model

vbcoach

Going to lift my Club car precedent and I'm looking for suggestions for which lift kit & wheels to purchase?
I'm also looking to confirm which model I have....I purchased in 2008 what i thought was a NEW precedent....however this is my info from the sticker in the cab...
9V0833-490833
REMAN Precedent

i believe it may be an '04
and I want to make sure I get the right lift kit/model etc.
THanks for looking/sharing.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

CCFanatic

Any lift will fit your Precedent. As for the SN, under the floor mat and the access cover to the pedal group, there is the original SN sticker on the aluminum cross member. Just follow the brake cables, you will see it

mymonstertruck

I would recommend a A-arm lift. Smooth ride and has nice suspension which is better for the cart all around. They are more $ than just a spindle lift. But it all depends on the use of the cart. Off road use I would go A-arm. On road a spindle lift would be just fine.

vbcoach

Thanks, found that SN sticker..
PQ0513-490833

This means its a 2005 and the Q means its iQ, correct?

Would you recommend replacing the shocks when lift kit is installed?

CCFanatic

Correct, you have a 2005 Precedent IQ that was remaned in 08

mymonstertruck

No need unless they are blown out like a hooker. If they hold pressure and rebound I would keep them on.

TahoeDawgZ71

vbcoach

thanks....I've ordered a-arm kit combo for my son to install. He is also going to replace rear springs. I will let you know how it all goes.

vbcoach

How about speed settings. Ive read a few posts about getting more speed..
How does one confirm what setting the cart is on now and how to change it. thanks!

jakesnake27

You can measure the speed with a GPS to see what code you're set on. Around 15 mph is code 3, around 19 is code 4. If it has code 4, there should be a sticker near the serial number sticker that has the codes printed on it needed for code 4.