lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-23-2015, 11:18 AM   #1
Not Yet Wild
 
Join Date: Mar 2015
Posts: 16
Default 2010 club car precedent hill brake failure

My hill brake on my 2010 precednt will not engage. Is there something I can adjust so that it will click on place when I press the hill brake ?
Jheredia50 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-23-2015, 12:56 PM   #2
Gone Wild
 
scooterman's Avatar
Club Car
 
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,641
Default Re: 2010 club car precedent hill brake failure

I'm assuming you're saying parking break? Under the floor mat is the location of the break pedal adjustments. There are 4 screws to remove the mat then a plastic cover over the cable assembly. From there you can adjust the cable tension, you may need to take out some of the slack, If this doesn't help, you may need new break shoes.
scooterman is offline   Reply With Quote
Unread 03-23-2015, 02:31 PM   #3
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,002
Default Re: 2010 club car precedent hill brake failure

There's no built in adjuster anywhere on that pedal mechanism unfortunately. Remove the pedal assembly from the car and flip it upside down. Look for wear where the pawl locking wheel rests on the accel pedal stopper. That's usually where it's worn. Take a picture and I'll let you know if it's a replaceable part or not.
TahoeDawgZ71 is offline   Reply With Quote
Unread 03-23-2015, 02:44 PM   #4
Gone Wild
 
scooterman's Avatar
Club Car
 
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,641
Default Re: 2010 club car precedent hill brake failure

After seeing Davids reply, I understand the question now LOL sorry.
scooterman is offline   Reply With Quote
Unread 03-23-2015, 03:01 PM   #5
Not Yet Wild
 
Join Date: Mar 2015
Posts: 16
Default Re: 2010 club car precedent hill brake failure

Thanks for the information I will do my best to remove today and post pictures. If not I will try and get done by tomorrow
Jheredia50 is offline   Reply With Quote
Unread 03-23-2015, 09:19 PM   #6
Not Yet Wild
 
Join Date: Mar 2015
Posts: 16
Default Re: 2010 club car precedent hill brake failure

Well I tried to disassemble the brake assembly but had problems it appears that mostly everything on he bottom side of the brake assembly is corroded and rusted out. I'm assuming that I'll need to replace the entire assembly. If anyone has a link or instructions on how to do this process let me know.

If you feel like I don't need an entire assembly let me know that as well.

Thanks again
Jheredia50 is offline   Reply With Quote
Unread 03-23-2015, 09:58 PM   #7
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,002
Default Re: 2010 club car precedent hill brake failure

Quote:
Originally Posted by Jheredia50 View Post
Well I tried to disassemble the brake assembly but had problems it appears that mostly everything on he bottom side of the brake assembly is corroded and rusted out. I'm assuming that I'll need to replace the entire assembly. If anyone has a link or instructions on how to do this process let me know.

If you feel like I don't need an entire assembly let me know that as well.

Thanks again
Has the vehicle been near the beach? If it has, I'd just replace the entire pedal assembly. There's no fixing the corrosion that comes from coastal cars.
TahoeDawgZ71 is offline   Reply With Quote
Unread 03-23-2015, 11:49 PM   #8
Not Yet Wild
 
Join Date: Mar 2015
Posts: 16
Default Re: 2010 club car precedent hill brake failure

Yes. And for future reference when purchasing a pre owned cart, always check where the carts originated from, the cart was from mission Texas right in the coast.

Should this be concerning for other items on the cart? Nuts bolts spindles springs etc?
Jheredia50 is offline   Reply With Quote
Unread 03-24-2015, 08:01 AM   #9
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,002
Default Re: 2010 club car precedent hill brake failure

Not really. Not until you try to work on it at least. It won't hurt the rest of the car, just makes the hardware stubborn.
TahoeDawgZ71 is offline   Reply With Quote
Unread 03-24-2015, 01:15 PM   #10
Not Yet Wild
 
Join Date: Mar 2015
Posts: 16
Default Re: 2010 club car precedent hill brake failure

Well the plan is to put a jakes lift kit on it and new body and wheels and tires.
Jheredia50 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2010 Precedent Brake Light Sitch Electric Club Car
Possilbe MCOR Failure on 2005 48V Precedent Club Car Electric Club Car
2010 Club Car Precedent Brake Lights Not Working Electric Club Car
2010 Precedent Brake lights Don't Work Electric Club Car


All times are GMT -5. The time now is 06:22 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.