Microswitch issue...

mike_dmt · 04-13-2015, 02:37 PM

So, I'm hoping this was a fluke, but...

Had a bad solenoid, and 2 bad MS's.. So, switched everything out for new, and instantly one of the new MS's linked with a new solenoid burned up. I can jump the solenoid, and it works fine.

I have voltage at the small terminals too.. Is there a chance I installed something wrong, or did I just get a bad MS?

mike_dmt · 04-13-2015, 06:41 PM

Got it figured out.. Just happened to be a bad switch..

04-13-2015, 02:37 PM	#1
mike_dmt Gone Wild Join Date: Jul 2014 Posts: 349	Microswitch issue... So, I'm hoping this was a fluke, but... Had a bad solenoid, and 2 bad MS's.. So, switched everything out for new, and instantly one of the new MS's linked with a new solenoid burned up. I can jump the solenoid, and it works fine. I have voltage at the small terminals too.. Is there a chance I installed something wrong, or did I just get a bad MS?
mike_dmt Gone Wild Join Date: Jul 2014 Posts: 349

04-13-2015, 06:41 PM	#2
mike_dmt Gone Wild Join Date: Jul 2014 Posts: 349	Re: Microswitch issue... Got it figured out.. Just happened to be a bad switch..
mike_dmt Gone Wild Join Date: Jul 2014 Posts: 349

Similar Threads
Thread	Forum
Microswitch	Electric EZGO
Where is the microswitch?	Electric EZGO
One Microswitch?	Electric EZGO
Microswitch	Electric EZGO
microswitch id please	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum