lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 04-29-2015, 02:55 PM   #1
Gone Wild
 
bsa_bob's Avatar
Club Car
 
Join Date: Nov 2013
Location: mich
Posts: 592
Default Got the s/metal screws out.wha...

What to i do? to get he black dash center panel out , Does the complete aluminum surround ring have to come of the dash?Or does it pop off the Flatblade screw driver? .....(taking small inst; lite out to check it for its problem) and,thank you for taking the time to read this. bob s
bsa_bob is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-29-2015, 02:56 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,077
Default Re: Got the s/metal screws out.wha...

The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.
scottyb is offline   Reply With Quote
Unread 04-29-2015, 04:14 PM   #3
Gone Wild
 
bsa_bob's Avatar
Club Car
 
Join Date: Nov 2013
Location: mich
Posts: 592
Default Re: Got the s/metal screws out.wha...

Quote:
Originally Posted by scottyb View Post
The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.

I am saying .it isn't just popping off for me. its a tight fit .as it appears, Can i lift it off from the bottom?.just the center plastic piece. How much of the dash..pops out? just the small center section holding the lite and the key?
bsa_bob is offline   Reply With Quote
Unread 04-29-2015, 04:31 PM   #4
Gone Wild
Club Car
 
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,939
Default Re: Got the s/metal screws out.wha...

After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out.

.
tag50 is offline   Reply With Quote
Unread 04-29-2015, 04:41 PM   #5
Gone Wild
 
bsa_bob's Avatar
Club Car
 
Join Date: Nov 2013
Location: mich
Posts: 592
Default Re: Got the s/metal screws out.wha...

Quote:
Originally Posted by tag50 View Post
After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out.

.
thank you Tag 50- much appreciated my friend bob s
bsa_bob is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Seat back Screws Gas Club Car
Crank case screws Gas Yamaha
Questions on Carb Screws Gas EZGO
Rusty Screws - What did they look like new? Electric EZGO
Are these the right screws? Electric Club Car


All times are GMT -5. The time now is 01:33 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.