Got the s/metal screws out.wha...

bsa_bob · 04-29-2015, 01:55 PM

What to i do? to get he black dash center panel out , Does the complete aluminum surround ring have to come of the dash?Or does it pop off the Flatblade screw driver? .....(taking small inst; lite out to check it for its problem) and,thank you for taking the time to read this. bob s

scottyb · 04-29-2015, 01:56 PM

The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.

bsa_bob · 04-29-2015, 03:14 PM

Quote:

Originally Posted by scottyb

The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.

I am saying .it isn't just popping off for me. its a tight fit .as it appears, Can i lift it off from the bottom?.just the center plastic piece. How much of the dash..pops out? just the small center section holding the lite and the key?

tag50 · 04-29-2015, 03:31 PM

After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out.

.

bsa_bob · 04-29-2015, 03:41 PM

Quote:

Originally Posted by tag50

After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out.

.

thank you Tag 50- much appreciated my friend

bob s

04-29-2015, 01:55 PM	#1
bsa_bob Gone Wild Join Date: Nov 2013 Location: mich Posts: 671	Got the s/metal screws out.wha... What to i do? to get he black dash center panel out , Does the complete aluminum surround ring have to come of the dash?Or does it pop off the Flatblade screw driver? .....(taking small inst; lite out to check it for its problem) and,thank you for taking the time to read this. bob s

04-29-2015, 01:56 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Got the s/metal screws out.wha... The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.

04-29-2015, 03:31 PM	#4
tag50 Gone Wild Join Date: Apr 2014 Location: Oregon City, Or Posts: 1,977	Re: Got the s/metal screws out.wha... After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out. .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Seat back Screws	Gas Club Car
Crank case screws	Gas Yamaha
Questions on Carb Screws	Gas EZGO
Rusty Screws - What did they look like new?	Electric EZGO
Are these the right screws?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum