lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars

Post New Thread  Reply
Thread Tools Display Modes
Unread 02-04-2016, 09:25 PM   #41
Not Yet Wild
Join Date: Dec 2015
Location: Rock Hill, SC
Posts: 58
Default Re: stainless steel washers

Ok..I have more silly questions...but I'm trying to do the right things with our new baby.
I just got ScottyB's wire set in - they are 1000% higher quality than the cables that are currently installed.

Cleaning the terminals - I understand using the baking soda / water solution to clean and neutralize everything. Then you dry. What about making the terminals shine? I've ready lots of opinions about using sandpaper versus NOT using sand paper because of the potential leftover grit. What about a small file? Just for fun I grabbed the car battery terminal cleaner and hit one of the posts up - it shined up pretty well.

Dielectric grease - This seems to be a question of religious faith. Should it go on the posts as soon as I clean them and BEFORE I put the cables on them? It seems counter-intuitive to put anything between the cable ends and the posts - you want metal to metal contact right? But it seems to be a BIG deal in certain forums. I plan on spraying everything down with the anti-corrosion battery spray once it's all hooked up.

Anti-seize or Dielectric on the stainless nuts? Will the dielectric act as an anti-seize?

What about the connections to the motor and controller? Should I take any special steps when putting those wires on?
geonjay is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Unread 02-04-2016, 09:50 PM   #42
Old Sky Soldier
mrgolf's Avatar
Club Car
Join Date: Dec 2011
Location: Kentucky
Posts: 3,147
Default Re: stainless steel washers

On the motor cables use two wrenches. Don't let the post turn. Clean post with brush and put cables on. Then put anti corrosion treatment on.
mrgolf is online now   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car

Thread Tools
Display Modes

Similar Threads
Thread Forum
stainless Steel Column cover Electric Club Car
Belleville Washers Extreme DC!
new billet sport shifter and stainless steel kick panel Electric Club Car
Mirror Shine on Stainless Steel Design Center

All times are GMT -5. The time now is 01:41 PM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.