lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-23-2015, 09:20 PM   #11
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,978
Default Re: 98 CC DS No Click No Go

I have on my iPad a PDFs file that shows all the test for troubleshooting 98-99 regen 2 carts. I got the file off this site somewhere. I don't know how to upload a file like this on an iPad.
mrgolf is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-23-2015, 09:37 PM   #12
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,583
Default Re: 98 CC DS No Click No Go

So we don't cross post on other threads I will just copy the same reply here, try these tests:
Use this diagram for reference.
With the OBC by-pass in place (OBC 6-pin connector Red/White jumped with the Blue wire).

Turn Tow/Run switch to Run.

Turn the Key switch ON

Put FNR on Forward.

Verify that You have:
+48v on Controller pin #1 Red wire.
+48v on Controller pin #2 Orange/White wire.
+48v on Controller pin #4 White wire.
When You press the Pedal:
+48v on Controller pin #3 Green/White wire
If You have all of the above, that satisfies all controller input requirements.

Place your meter positive probe on pack positive.

Place your meter negative probe on Controller pin #11 Blue/White wire.
When You press the Pedal You should get +48v
if not, the controller is bad.
Sergio is offline   Reply With Quote
Unread 07-23-2015, 11:10 PM   #13
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,978
Default Re: 98 CC DS No Click No Go

Glad you showed up on this one Sergio
mrgolf is offline   Reply With Quote
Unread 07-24-2015, 04:51 PM   #14
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

Ok, Home from work!

Thanks for the replies.

Looks like the easiest way to bypass the obc is to connect the right solenoid, right terminal (v+) to the blue wire (rear) terminal on the back of that same solenoid?

Basically we are giving 48v+ to the F/R switch, the OBC, the buzzer, etc?

And then I take the controller plug out of the controller and test the pins on the wire harness after hooking up the battery, etc....
Buymybuggie is offline   Reply With Quote
Unread 07-24-2015, 04:58 PM   #15
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,583
Default Re: 98 CC DS No Click No Go

That will do it

You can also read over this other similar thread for tests.

2000 48v Club Car Regen 2 Dead
Sergio is offline   Reply With Quote
Unread 07-24-2015, 05:26 PM   #16
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

Ok I read through that thread. Wouldn't it be nice if they posted the final result? New Controller, rebuilt?

Just an aside, whats inside one of these controllers? Lots of PCB's and IC's?

Headed outside to figure out how the connector clip works.
Buymybuggie is offline   Reply With Quote
Unread 07-24-2015, 05:38 PM   #17
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

ok +V at pins 1,2,3,4 as expected, moving to the next test.
Buymybuggie is offline   Reply With Quote
Unread 07-24-2015, 05:39 PM   #18
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

Looks like these are done with the controller plug back in:


Place your meter positive probe on pack positive.

Place your meter negative probe on Controller pin #11 Blue/White wire.

When You press the Pedal You should get +48v

if not, the controller is bad.
Buymybuggie is offline   Reply With Quote
Unread 07-24-2015, 05:52 PM   #19
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

OK, Tow On, key on, FNR on F, Jumper V+ to Blue:

.7 volts with and without a pedal push.

Continuity check of blue/wht wire from alligator clip on solenoid to pin 11 (disconnected from controller), shows about 345 ohms. Reseated Alligator a couple times, same value.

Going to look for my other meter and double check.
Buymybuggie is offline   Reply With Quote
Unread 07-24-2015, 05:59 PM   #20
Not Yet Wild
 
Join Date: Jul 2015
Posts: 20
Default Re: 98 CC DS No Click No Go

confirmed, 347 ohms, second meter. Should be one end of wire to the other, I don't see anything else on the diagram.
Which would imply a wire living on half a thread?
Buymybuggie is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
RXV 2009 click click but won't move Electric EZGO
No click, click, when I hook up my charger? Electric Club Car
Won't even click... Gas EZGO
Click Click - will not move ! Electric EZGO
no click or go Electric Club Car


All times are GMT -5. The time now is 09:09 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.