lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-02-2015, 10:38 AM   #1
chess0408
Not Yet Wild
 
Join Date: Mar 2013
Posts: 24
Default bypassing obc 96 series question

Quick question my cart has no click new solenoid was installed recently but when I jump the yellow wire off the solenoid to -battery pack I get a click but no movement is that normal? Do I also need to just the battery negative or do I have other issues? Thanks again for all the support everyone gives!!
chess0408 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-02-2015, 10:56 AM   #2
crash test dummy
Guest
 
Posts: n/a
Default Re: bypassing obc 96 series question

  Reply With Quote
Old 08-02-2015, 11:01 AM   #3
chess0408
Not Yet Wild
 
Join Date: Mar 2013
Posts: 24
Default Re: bypassing obc 96 series question

Sorry 96 48volt dumb me
chess0408 is offline   Reply With Quote
Old 08-02-2015, 11:10 AM   #4
crash test dummy
Guest
 
Posts: n/a
Default Re: bypassing obc 96 series question

Quote:
bypassing obc 96 series question
are you asking about your OBC ?
bypassing the OBC only allows charger to work

as for replaced solenoid check to make sure all wires got replaced .. I've had them hang down out of sight
  Reply With Quote
Old 08-02-2015, 11:19 AM   #5
chess0408
Not Yet Wild
 
Join Date: Mar 2013
Posts: 24
Default Re: bypassing obc 96 series question

I believe I have all the wires hooked up correctly it did work and now I have no click unless I bypass the small yellow wire to the negative battery pack I thought that's how I read how to bypass the obc
chess0408 is offline   Reply With Quote
Old 08-02-2015, 11:27 AM   #6
crash test dummy
Guest
 
Posts: n/a
Default Re: bypassing obc 96 series question

lol ... it's the gray wire off the charging receptacle to by pass OBC

check the micro switches at the f/r switch
  Reply With Quote
Old 08-02-2015, 11:29 AM   #7
chess0408
Not Yet Wild
 
Join Date: Mar 2013
Posts: 24
Default Re: bypassing obc 96 series question

Ugggg I'm dumb where do I connect the Grey wire? I owe ya!!
chess0408 is offline   Reply With Quote
Old 08-02-2015, 11:41 AM   #8
crash test dummy
Guest
 
Posts: n/a
Default Re: bypassing obc 96 series question

your wiring diagram


gray wire at charging receptacle has nothing to do with cart movement

OBC by pass

  Reply With Quote
Old 08-02-2015, 11:54 AM   #9
chess0408
Not Yet Wild
 
Join Date: Mar 2013
Posts: 24
Default Re: bypassing obc 96 series question

Ok I did that and just like you thought no click my pack voltage is 49.9
chess0408 is offline   Reply With Quote
Old 08-02-2015, 12:07 PM   #10
crash test dummy
Guest
 
Posts: n/a
Default Re: bypassing obc 96 series question

ok ... check micro switches at f/r switch

  Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Bypassing OBC Electric Club Car
bypassing obc Electric Club Car
bypassing a powerdrive 2 Electric Club Car
bypassing govenor Gas Club Car
bypassing governor Gas Yamaha


All times are GMT -5. The time now is 12:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.