lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-04-2015, 09:52 AM   #1
Not Yet Wild
 
Join Date: May 2015
Posts: 21
Default 2010 Precedent Winch mount?

Has anyone had any luck finding a good winch mount for their club car Precedent or any pics they could share of how they may have manufactured one?? I purchased a small home made mounting bracket from a dealer that bolts on to the two bolts where your front end bolts together basically but after looking at this design, I doubt 2 bolts are strong enough to use to hold a winch mount. I'm thinking I may have to build something that goes in to the frame on the front. Any suggestions here?
WayneMac is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-08-2015, 12:26 AM   #2
Getting Wild
 
w4rwf's Avatar
Club Car
 
Join Date: Jul 2015
Posts: 92
Default Re: 2010 Precedent Winch mount?

just saw your post, but I used a couple pieces of 1.5 in angle iron, a piece of flat steel welded up to the two pieces of angle iron. I bolted those up to the top of the frame and the part sticking out I bolted to my bumper. That setup really strengthened the whole setup in the front.

I will try to post up a few pics for you tomorrow.

Harbor Freight has the 2500lb atv wenches on sale right now for 54.88.

My wench has already saved my arse last weekend. Going up a really steep embankment and the rear wheels just lost traction on the rocks and started spinning. The wench pulled the cart, my big behind and my dad, not small his own self either right on up the bank without any problem whatsoever.
w4rwf is offline   Reply With Quote
Unread 08-08-2015, 05:49 PM   #3
Not Yet Wild
 
Join Date: May 2015
Posts: 21
Default Re: 2010 Precedent Winch mount?

Man i sure would love to see some pictures of what you did. Thanks for the input!
WayneMac is offline   Reply With Quote
Unread 08-08-2015, 08:46 PM   #4
Getting Wild
 
w4rwf's Avatar
Club Car
 
Join Date: Jul 2015
Posts: 92
Default Re: 2010 Precedent Winch mount?



This is a front view. The winch and fairlead are mounted to the piece of flat steel.



This side view shows the brush guard mounted to the bottom side of the aluminum frame and my angle iron bolted to the top side of the aluminum frame and then the angle iron also bolted into the brush guard. Very, very stiff and sturdy. You shake the brush guard and you move the whole cart.

Hope this helps. Nothing fancy and not very pleasing to look at but it works and works well for me.
w4rwf is offline   Reply With Quote
Unread 08-09-2015, 09:34 AM   #5
Not Yet Wild
 
Join Date: May 2015
Posts: 21
Default Re: 2010 Precedent Winch mount?

Thanks for the pictures!
WayneMac is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Where to mount voltage reducer on 2010 Precedent? Electric Club Car
winch mount Gas Yamaha
G22 winch mount Gas Yamaha
Winch mount Lifted Golf Carts
EZ Go winch mount Lifted Golf Carts


All times are GMT -5. The time now is 03:13 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.