lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-13-2015, 09:08 PM   #1
Getting Wild
 
Ohc123's Avatar
Club Car
 
Join Date: Jun 2014
Location: Michigan
Posts: 80
Default Has anyone paired a bandit motor with a 500 amp controller?

Hello BGW!!
Has anyone paired a plumquick bandit with a 500 amp controller?
Just wondering how speed and torque results.
I have a 600 amp madjax and would like to try a Bandit motor.
Thanks everyone for your help and sharing your experiences
Ohc123 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-13-2015, 09:20 PM   #2
Gone Wild
Club Car
 
Join Date: Apr 2015
Location: Athens, GA
Posts: 341
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

I'm in the renovation process now with a SPM48500 Alltrax and Bandit. Got everything wired but haven't fired it up yet but I'm hoping it will have decent performance. Within a couple of months I should be able to report on how well it did.
klanel is offline   Reply With Quote
Unread 08-13-2015, 10:46 PM   #3
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,981
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

Quote:
Originally Posted by Ohc123 View Post
Hello BGW!!
Has anyone paired a plumquick bandit with a 500 amp controller?
Just wondering how speed and torque results.
I have a 600 amp madjax and would like to try a Bandit motor.
Thanks everyone for your help and sharing your experiences

I would give the guys at plumb quick a call. They can set the motor up for what you want.
mrgolf is online now   Reply With Quote
Unread 08-13-2015, 10:57 PM   #4
Not Yet Wild
Club Car
 
Join Date: Jun 2011
Location: San Augustine, TX
Posts: 43
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

I have a 500 amp Alltrax controller with a plum quick bandit. It's on a 2007 Club Car Precedent with a 6" lift and 23" tires. I just put in new Trojan batteries and can get about 21 mph on our gravel driveway. We use the cart around the farm so speed is not a priority. It has plenty of torque. With passengers on the backseat and starting off on a hill, it will pull the front end off the ground. If we're in the sand, it'll spin both tires. We also pull a small trailer that we use for firewood and mulch. If you have any specific questions, let me know.
Moonbuggy is offline   Reply With Quote
Unread 08-14-2015, 10:46 AM   #5
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 6,170
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

I have a bandit in my limo cart with a DCX500 but haven't turned it all the way up yet. I did ask the guys at PQ about running the 500 with a bandit and they said it should be fine but really didn't recommend going higher. If you have a 600 you probably need a different motor...
kgsc is offline   Reply With Quote
Unread 08-14-2015, 07:09 PM   #6
Gone Wild
 
jjance's Avatar
Club Car
 
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

I wouldn't expect a lot of improvement until you combine your high amperage controller with a motor that can utilize the higher current. Compare it to putting a four barrel on a four cylinder engine.
jjance is offline   Reply With Quote
Unread 08-14-2015, 10:55 PM   #7
Getting Wild
 
Ohc123's Avatar
Club Car
 
Join Date: Jun 2014
Location: Michigan
Posts: 80
Default Re: Has anyone paired a bandit motor with a 500 amp controller?

I just did a test run on my stock motor with the 600 amp torque controller. 6" lift & 23" tires. I got 21mph on flat gravel toad and lots of torque. I cant imagine what the executioner would do! I bet it would hit at least 25 with lots of hill climbing ability!
Thanks for all these replies! It really helps!
Ohc123 is offline   Reply With Quote
Reply

Tags
bandit, controller, plumquick
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Controller for PQ Bandit in 2004 Precedent? Electric Club Car
Ez Go TXT with Bandit motor Electric EZGO
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller Electric Club Car
FX503 Controller with PQ Bandit Electric Club Car
which motor # is the bandit Electric Club Car


All times are GMT -5. The time now is 04:22 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.